Parts Needed to Flat Tow 2018 Jeep Wrangler JK Unlimited with Standard Bumper
Question:
Hey, I want to install baseplates into my 2018 jeep jk wrangler unlimited, with standard bumper. I already own a Falcon 2 tow bar for the rv, which has the safety and electrical wiring. Could you please suggest which baseplate and diode kit I will need.
asked by: Wirt B
Expert Reply:
We have just want you need. The correct Roadmaster base plate for your 2018 Jeep Wrangler JK Unlimited is the Roadmaster EZ4 part # RM-521448-4 which is confirmed as a fit.
This will work great with your Falcon 2 part # RM-520 tow bar.
If you needed lighting you could use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.
I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Standard
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Crossbar-Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Must-Have Flat Towing Components
- Q&A: Recommended Base Plate for 2024 Ford Maverick With a Blue Ox Base Plate That's Too Wide
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Which Bumpers Can I Flat Tow a Jeep Wrangler JLU With Using D-Ring Adapters
- Q&A: What do I Need to Flat Tow a Jeep Wrangler JK with Factory Bumper
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Which Roadmaster Base Plate Kit is Correct for 2013 Jeep Wrangler Unlimited 10th Anniversary Rubicon
- Q&A: Diameter, Maximum and Minimum Height for Air Bags in Firestone Ride-Rite System # F2071
- Q&A: Dingy Towing for 2017/2018 Toyota Corolla iM
- Q&A: Equipment Needed for Flat Towing 2016 Jeep Wrangler Unlimited Behind Motorhome