Does Equal-i-zer Weight Distribution System EQ37041ET Come With a Shank?

Question

Question:

does this come with a shank?

asked by: Shane T

0

Expert Reply:

The Equal-i-zer Weight Distribution # EQ37041ET does not come with a shank. This system has a tongue weight capacity of up to 400 lbs and there are three shanks compatible with that weight capacity, each of which are 12" long and fit 2" hitches:

# EQ90-02-4140 offers up to 7" of rise or 3" of drop

# EQ90-02-4240 offers up to 8" of rise or 4" of drop

# EQ90-02-4340 offers up to 10" of rise or 6" of drop

expert reply by: Kyle S

0

Answer 1

I'm sorry to hear about the troubles you are having and I can tell you that on your 2014 Jeep Wrangler JKU with the factory tow package, you are going to need circuit breakers when using a brake controller. You will need the Wiring Kit for…

view full answer...

Answer 2

Since your 2019 Jeep Wrangler Rubicon came with the factory towing package all you need to install the Prodigy P3 part #90195 is the correct install harness part #3073-P which plugs right in under the dash.

view full answer...

Answer 3

To convert the 4-way of your 2016 Jeep Wrangler to a 7-way so that you could install the Prodigy P3 #90195 which is a really great choice all you need is the part #ETBC7 which comes with everything needed to convert to a 7-way plus wire up the brake…

view full answer...

Answer 4

I'd be happy to help with that. You'll need the controller itself, part #90195 and the #ETBC7 brake controller install kit. The vehicle isn't prewired for a brake controller, so you will use the install kit and the pigtail that's…

view full answer...

Answer 5

We will have a brake controller that will fit your 2015 Jeep Wrangler Unlimited. However, this model vehicle does not have the plug and go style installation for the brake controller. The Tekonsha Prodigy P3 Controller, #90195, that you referenced…

view full answer...

Answer 6

To install the Prodigy P3 brake controller part #90195 in your 2016 Jeep Wrangler without the factory tow package but with an aftermarket 7-way you would need the brake controller wiring kit part #5506 which comes with everything needed to wire up…

view full answer...

Answer 7

The kit you need to convert your 4-way to a 6-way is the part #ETBC6 which plugs right into the 4-way and then comes with everything needed to wire in a brake controller. For a brake controller I would recommend the Prodigy P3 Brake Controller…

view full answer...

Answer 8

If your 2015 Jeep Wrangler Unlimited has a working 7-way already that is wired, which is what it sounds like you have since you said you adapted it to a 7-way, you can add a brake controller with no added wiring whatsoever with the Curt Echo Wireless…

view full answer...

Answer 9

If the display on your brake controller is not lighting up, then it is definitely not getting power and you will need to check the wiring running to the battery on your 2016 Jeep Wrangler Unlimited. If you have the Prodigy P3 #90195 then it will be…

view full answer...

Answer 10

Yes, we do have a generic brake controller wiring diagram on our Brake Controller Information page. I have added a link to it below. The bundle of wires you are looking for should contain the following: white with red stripe, blue with white stripe,…

view full answer...

Answer 11

If you are installing a 7-way and brake controller you will want to use a circuit breaker in-line when connecting the Black wire from the 7-way to the battery and in-line from the brake controller to the battery. The Black wire will draw 12 volt…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...