Can Curt Pintle Hook with 2-5/16 Inch Hitch Ball # C48200 Be Used with 2 Inch Ball

Question

Question:

Can this be used with a 2 inch ball instead>?

asked by: Mark

0

Expert Reply:

The Curt Pintle Hook # C48200 referenced in your question includes a 2-5/16 inch ball that can absolutely be swapped out for a 2 inch ball like # C48820.

This pintle hook and ball combo features a 16,000 pound towing capacity, a strong forged steel construction and a rust-resistant finish. It will bolt on to a pintle hook mounting plate like # C48343 for 2 inch hitch receivers.

I have attached a short video demonstration on this product that you can also check out.

expert reply by: Chris R

0

Answer 1

The Curt Pintle Hook Mounting Plate #C48343 referenced in your question has a towing weight capacity of 17,000 pounds. The mounting plate doesn't have a specific tongue weight capacity listed, as you will really just be limited by the…

view full answer...

Answer 2

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a…

view full answer...

Answer 3

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of…

view full answer...

Answer 4

We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…

view full answer...

Answer 5

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

view full answer...

Answer 6

It sounds like you are looking for an adjustable ball mount that has both a hitch ball and pintle hook combo. If that is the case then we have the perfect option for you in the Curt Pintle Hook part #C45908 which comes with a pintle hook/ball combo…

view full answer...

Answer 7

The Curt Pintle Hook #C48200 referenced in your question will work with the B&W Pintle Hook Mounting Plate #BWPMHD14004. The difference mounting holes between the two items will actually allow for a secure fit. The #C48200 pintle hook features…

view full answer...

Can Curt Pintle Hook with 2-5/16 Inch Hitch Ball # C48200 Be Used with 2 Inch Ball

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching