Correctly Sized Lug Nuts for Trailer Wheels

Question

Question:

I have 3/4 diameter lugnuts on my trailer .....looking at ur Americao stainless steel lugs but there are 7/8 .....will they work or do I have to find 3/4 , thank u for your time

asked by: Shannon

0

Expert Reply:

The lug nuts you need are going to depend on the diameter of your wheel bolts. For example, the 3/4" Americana # AM26NR fits a 1/2" wheel bolt with 20 threads per inch while the 3/4" CE Smith # CE11050 fits 7/16"-20 wheel bolts. I've added a link to our page with each of our lug nuts for you so you can find the correct one for your application.

expert reply by: Kyle S

0

Answer 1

The torque specs for your 2008 ce7 Canadian Trailers car trailer will be dependent on the lug nut size. The axle capacity and whether or not it has electric brakes will not change the specs for the wheel lug nut torque. I've attached a chart to…

view full answer...

Answer 2

Yes the lug nuts #LHLR103 that you referenced are a fit on the Malone MicroSport trailers.

view full answer...

Answer 3

If you still have the trailer manual, I would recommend checking that to see what the manufacturer of your trailer has set as the recommended torque specs for your hubs; a majority of the time, these issues are rooted in over/under tightening of the…

view full answer...

Answer 4

We have the exact size you are looking for with the Lionshead Lug Nut #LHLR103 which is for a 1/2 inch diameter wheel stud and has a 3/4 inch outer diameter. I would not recommend the lug nuts you referenced as they most likely would not fit into the…

view full answer...

Answer 5

Yes, the Kodiak Trailer Wheel Lug Nut part #KALN1375S works on any trailer with 1/2" lug nuts. It's made of stainless steel so it won't ever rust and it features a one piece construction so you don't have to worry about it…

view full answer...

Answer 6

The Goodyear Endurance ST255/85R16 Radial Tire with 16" Viking Aluminum Wheel #724862519AT is a lug centric tire and wheel combo, which fits hubs with 1/2"-20 or 9/16"-18 wheel bolts and you can secure with the Lionshead Trailer Wheel…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Correctly Sized Lug Nuts for Trailer Wheels

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching