Are the Boards in the Carpeted Bunk Boards Treated

Question

Question:

Are the wooden guides under the marine grade carpet treated or just regular wood?

asked by: Jeff S

0

Expert Reply:

I spoke with my contact at CE Smith and the wood in the Carpeted Bunk Boards # CE27600 is a non-treated wood. The carpet though is marine grade carpeting.

expert reply by: Jameson C

0

Answer 1

The mounting hardware that comes with the CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 will fit a 3 inch by 3 inch trailer frame. The guide ons can extend out up to 13 inches from the frame of the trailer they are installed on. There is…

view full answer...

Answer 2

Yes, there are. To attach the CE Smith Post-Style Guide-Ons item #CE27760 to your Ranger Trailer RT118P you will want to use the included hardware that comes with the Guide-Ons. We had a customer mount these guide-ons on the same trailer and I…

view full answer...

Answer 3

The CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 that you referenced comes with guide on bunks for both sides of your trailer. I attached a review video for you to check out as well.

view full answer...

Answer 4

According to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement…

view full answer...

Answer 5

The B&W Tow & Stow 3-Ball Mount - 3" Hitch - 7-1/2" Drop, 7" Rise - 21K - Black #BWTS30049B will not interfere with your rock tamers. From the hitch pin hole to the nearest point on the ball mount is 9-1/4 inches. This will…

view full answer...

Answer 6

The B&W Tow & Stow 2-Ball Mount #BW29FR for your 2019 GMC Sierra 1500 with the Multipro tailgate, is designed to mount so close that there is no room for a system like the Rock Tamers #ERT00108. We do have the WeatherTech Mud Flaps #WT66MV…

view full answer...

Answer 7

Since you mentioned wanting the most stability and not always being perfect when loading (understandably), I think the longer, 5 foot (60 inch) CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 is the best option as it will give you the most…

view full answer...

Answer 8

The distance between the clamps is going to depend on where you drill the holes to mount the boards. The bunk board dimensions are 60" long. This product is fully customizable to accommodate various trailer sizes. On the attached installation…

view full answer...

Answer 9

The best option for your boat to move better on and off your trailer is to use the Dutton-Lainson Boat Trailer Deluxe Roller Bunks #DL21741. These rollers make loading and launching your boat easy. They are available in 4 and 5 foot lengths, so…

view full answer...

Answer 10

Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will includes…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...