Does Curt Hitch 13831 Fit Extended "King" Cab 2003 Nissan Frontier

Question

Question:

Would this hitch fit a 2003 Nissan Frontier extended cab with a 6' bed?

asked by: Ben

0

Expert Reply:

Nissan refers to their cab style that is most commonly considered to be "extended cab" as a King cab. The Curt hitch part # 13831 that you referenced is a fit for the King Cab 2003 Nissan Frontiers so it would work well for you.

I also attached an install video for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Replacement Hitch Hardware Kit part #RHK comes with all hardware that the hitch would have come with when new. Therefore, if you order the kit for the Curt Trailer Hitch Receiver part #C11192 you would get the following: 2 CM-11192-NPW NUT PLATE…

view full answer...

Answer 2

I spoke with my contact at SportRack and she confirmed that your 2007 Honda Fit Sport will not require a short roof adapter like #SR1116 with the SportRack roof rack #SR1002. Generally the adapter is needed on 2 door models with shorter roofs or…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Does Curt Hitch 13831 Fit Extended "King" Cab 2003 Nissan Frontier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching