Recommended Steering Stabilizer for 2008 Workhorse W22 Chassis Class A RV

Question

Question:

I need a steering stabilizer for a 2008 W22 workhorse class A RV.

asked by: Dave T

1

Helpful Expert Reply:

For your 2008 Workhorse W22 Chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA. This system has a tempered steel spring that works when compressed to push back to center and when extended to pull back to center. It helps minimize wander and will help you maintain control in the event of crosswinds, rut tracking, uneven lanes, and even a tire blowout. It will install in about 1 hour and will give you far less driving fatigue.

expert reply by: Jason S

1

Answer 1

For the 2002 Workhorse W22 the correct Roadmaster steering stabilizer with mounting brackets is #RM-RBK13-RSSA. The mounting brackets alone are #RM-RBK13. I have included a link to our FAQ on stability control for heavy duty vehicles.

view full answer...

Answer 2

The difference between the Roadmaster Reflex steering stabilizers is how they connect to the brackets that fit onto the RV. Take a look at the pictures I attached and you can see the difference between the ends of them. #RM-RSSA has eyes on both ends…

view full answer...

Answer 3

The Roadmaster Steering Stabilizer part #RM-RBK13-RSSA does fit the W20, W22, and W24 Workhorse chassis like you asked about.

view full answer...

Answer 4

According to my research the Roadmaster Rear Anti-Sway Bar part #RM-1259-109 will install on the 2004 Newmar Scottsdale that is on a 2003 W-22 Workhorse chassis. The Newmar Scottsdale from my research is 33-1/2 ft so according to Roadmaster you will…

view full answer...

Answer 5

For your 2008 Workhorse W22 motorhome what you'd want for a front sway bar and steering stabilizer is the Roadmaster Front Sway Bar and TruTrac Rod Kit part #RM-1259-106 which comes with the front bar and a TruTrac rod which acts as a steering…

view full answer...

Answer 6

I have a great solution for a steering stabilizer that fits your 2006 National Sea Breeze built on a Workhorse W22 chassis but we don't have a Blue Ox option instead you'd want the Roadmaster stabilizer part #RM-RBK13-RSSA which is confirmed…

view full answer...

Answer 7

The front trac bar that comes in the Roadmaster Kit #RM-1259-106 that you referenced will do the same job as a steering stabilizer but won't be as effective. For the best of both worlds I recommend going with the front Anti-Sway Bar #RM-1259-105…

view full answer...

Answer 8

According to the original sales brochure I looked up, your 2005 Newmar Mountain Aire 3778 was built on the Workhorse W-24 chassis. The same brochure states that the overall length of your coach is 37 feet 5 inches. Given that information, you'd…

view full answer...

Answer 9

Your 2006 Fleetwood Bounder is built on a Workhorse W Series chassis so for a steering stabilizer you would want the part #RM-RBK13-RSSA which is a confirmed fit and would work well.

view full answer...

Answer 10

Yes, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA would be a compatible fit for your 2007 Winnebago Adventurer on a Workhorse W24 Chassis.

view full answer...

Answer 11

I'm glad you asked as that info is confusing for sure. I reached out to my tech contact at Roadmaster and the only thing available for your gasoline model W22 chassis is the Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs…

view full answer...

Answer 12

In regards to the Roadmaster Reflex Steering Stabilizer part #RM-RBK13-RSSA, the chassis bracket which is the larger of the two will be installed on the passenger side preferably but can be installed on the driver side as well. That said, I don't…

view full answer...

Recommended Steering Stabilizer for 2008 Workhorse W22 Chassis Class A RV

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching