Steering Stabilizer Recommendation for 2006 Fleetwood Bounder Motorhome

Question

Question:

Im looking for a stabilizer for my 06 Fleetwood founder can you help me?

asked by: Gary M

0

Expert Reply:

Your 2006 Fleetwood Bounder is built on a Workhorse W Series chassis so for a steering stabilizer you would want the part # RM-RBK13-RSSA which is a confirmed fit and would work well.

expert reply by: Jameson C

0

Answer 1

In regards to the Roadmaster Reflex Steering Stabilizer part #RM-RBK13-RSSA, the chassis bracket which is the larger of the two will be installed on the passenger side preferably but can be installed on the driver side as well. That said, I don't…

view full answer...

Answer 2

According to the original sales brochure I looked up, your 2005 Newmar Mountain Aire 3778 was built on the Workhorse W-24 chassis. The same brochure states that the overall length of your coach is 37 feet 5 inches. Given that information, you'd…

view full answer...

Answer 3

The steering stabilizer we offer that is designed to work with your 2010 Workhorse W24 is part #RM-RBK13-RSSA. This attaches to the steering mechanism on one end and on the other end attaches to the chassis undercarriage. This stabilizer helps you…

view full answer...

Answer 4

For the 2002 Workhorse W22 the correct Roadmaster steering stabilizer with mounting brackets is #RM-RBK13-RSSA. The mounting brackets alone are #RM-RBK13. I have included a link to our FAQ on stability control for heavy duty vehicles.

view full answer...

Answer 5

The front trac bar that comes in the Roadmaster Kit #RM-1259-106 that you referenced will do the same job as a steering stabilizer but won't be as effective. For the best of both worlds I recommend going with the front Anti-Sway Bar #RM-1259-105…

view full answer...

Answer 6

Yes, the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA would be a compatible fit for your 2007 Winnebago Adventurer on a Workhorse W24 Chassis.

view full answer...

Answer 7

For your 2008 Workhorse W22 Chassis, I recommend the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes #RM-RBK13-RSSA. This system has a tempered steel spring that works when compressed to push back to center and…

view full answer...

Answer 8

For your 2008 Workhorse W22 motorhome what you'd want for a front sway bar and steering stabilizer is the Roadmaster Front Sway Bar and TruTrac Rod Kit part #RM-1259-106 which comes with the front bar and a TruTrac rod which acts as a steering…

view full answer...

Answer 9

According to my research the Roadmaster Rear Anti-Sway Bar part #RM-1259-109 will install on the 2004 Newmar Scottsdale that is on a 2003 W-22 Workhorse chassis. The Newmar Scottsdale from my research is 33-1/2 ft so according to Roadmaster you will…

view full answer...

Answer 10

The Roadmaster Reflex Steering Stabilizer #RM-RBK13-RSSA will provide you with some stability on your 2007 Workhorse W22 motorhome, but a rear anti-sway bar is the best ways to provide stabilization for your motorhome. The reason is because they are…

view full answer...

Answer 11

Yes! Probably the single best addition you can make to provide better handling in your RV would be to install a rear anti-sway bar. Helper springs treat the symptom but not the cause like an anti-sway bar would. There are 2 rear sway bar options for…

view full answer...

Answer 12

I'm glad you asked as that info is confusing for sure. I reached out to my tech contact at Roadmaster and the only thing available for your gasoline model W22 chassis is the Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs…

view full answer...

Steering Stabilizer Recommendation for 2006 Fleetwood Bounder Motorhome

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching