Do TorkLift Custom Camper Tie-Downs for 2017 Chevy Silverado 2500 Include Turnbuckles

Question

Question:

do the tie downs come with the turn buckets or are they extra ?

asked by: Ray C

0

Expert Reply:

The TorkLift Custom Frame-Mounted Camper Tie-Downs referenced in your question ( # TLC4204 for the front and # TLC3215 for the rear) are confirmed to fit your 2017 Chevy Silverado 2500 with an 8 foot bed, a board/step underneath the truck bed and a factory trailer hitch. These custom-fit tie-downs include the inserts, frame brackets and hardware, but do not include turnbuckles.

We do have turnbuckles available from Torklift and they come in various styles. Each kit includes 4 lockable turnbuckles that have a 25 to 43 inch reach. The keys and locks are also included and everything has a lifetime warranty.

For Gray you will use # TLS9522-2-LK, for Black you will use # TLS9529-2-LK, and for Polished Stainless Steel you can use part # TLS9526-2-LK.

I have attached a couple video demonstrations on these turnbuckles that you can also check out.

expert reply by: Chris R

0

Answer 1

The Pollak Trailer Connector Adapter - 7-Blade Plug to 7-Pole Round Pin - Die-Cast Zinc #PK12728 will actually not fit the plug you have on your Lance Camper. This is due to Lance making their own style plugs every now and then. This has caused…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

Yes we do, for the rear tie downs you'd want the #TLC3217 and then for the front #TLC4204 and you'd be set. I confirmed with Torklift that these are the correct fit for your 2016 GMC Sierra 3500 dually with the full length running boards.

view full answer...

Answer 4

First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 #RM97RR for your 2024 Ford Maverick. The item #RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 8

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as facing…

view full answer...