Recommended Spare Tire Cover for 5.70-8 Trailer Tire

Question

Question:

Hello, would you have a spare tire cover that would fit a 5.70-8 trailer tire ?

asked by: Jim

1

Helpful Expert Reply:

The overall diameter of the 5.70-8 trailer tire is 18.1 inches. We have a few options for this size, and I recommend the Adco Ultra Tyre Gard RV Wheel Covers - 18" to 22" - Black # 290-3975 because of their fit and the bungee ball fastening system. They are heavy duty vinyl and have a flannel backing.

I've linked the page to you options confirmed to fit. Although these are covers for storing your RV, the cover will work well with a spare tire as well.

expert reply by: Jason S

1

Answer 1

The overall diameter of the 5.70-8 trailer tire is 18.1 inches. We have a few options for this size, and I recommend the Adco Ultra Tyre Gard RV Wheel Covers - 18" to 22" - Black #290-3975 because of their fit and the bungee ball…

view full answer...

Answer 2

There are covers for the 18 inch diameter 5.70-8 trailer tires, though not a single cover for a spare of that size. The covers that fit are from Adco and specifically designed to fit tires that are between 18 inches in diameter (like your 5.70-8)…

view full answer...

Answer 3

Depending on your current regulator, you will want either a single stage like the MB Sturgis Single Stage Propane #108072 or a dual stage like the MB Sturgis Horizontal 2-Stage Propane Regulator #108221 to replace your current popup camper setup.…

view full answer...

Answer 4

Yes, if you're looking for a stabilizer jack replacement for your Coleman, the #TJ01RT should meet your needs. You may also be interested in #TJ01RT-HD, which includes two jacks as well as a handle.

view full answer...

Answer 5

Since trailer tire #AM3H290 is about 8-1/2 inches wide and 18 inches tall I recommend a cover designed for 21 inch tall tires #CE27410. This cover was made for 21 x 6-1/2 inch tires so the extra height of the cover will compensate for the 6-1/2…

view full answer...

Answer 6

Your tires should be 18.5 x 8.5 - 8 tires, which means they are on 8" wheels. If so, that is the same as a 216/60-8 tire which measures 18.2" in diameter. The tire covers I recommend for you are the Adco Tyre Gard #290-3975, which…

view full answer...

Answer 7

All white spare tire covers we offer are shown on the linked page. These are intended for tire overall diameters of 21-inches and up, such as Classic Accessories' #052963751000. We do have a tire storage cover set in white, as opposed to a…

view full answer...

Answer 8

For your 1970 Ford F-100 with a standard chrome bumper the Draw Tite hitch part #41001 is a confirmed fit that will work well for you. The hitch opening will be right underneath the bumper as well.

view full answer...

Answer 9

The Kenda K353 Bias Trailer Tire - 5.70-8 #AM10013 is 18" tall. The section width is 5.8" also.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Recommended Spare Tire Cover for 5.70-8 Trailer Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching