Which Draw Tite Hitch Fits 2018 Audi Q5

Question

Question:

the hitch 75940 does not on an audi Q5 2018 !!!

asked by: Guillaume

0

Expert Reply:

You are correct, the # 75940 does not fit a 2018 Audi Q5, instead you'd want the # 76138 which is the correct fit for the 2018 model.

The # 75940 is a fit for the 2011-2017 Q5 models.

expert reply by: Jameson C

0

Answer 1

With no bikes loaded on your rack, the sensors would not detect the rack and go off. With bikes loaded, most likely the sensors would sense the bikes. The sensors are only active when you are in reverse though. So it's not like you would have to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Thanks for reaching out! Since your 2024 Toyota Grand Highlander doesn't come with the factory tow package you need the Curt Wiring Kit #C59236 which splices into your current wiring and get powered directly by the battery on your vehicle.

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Which Draw Tite Hitch Fits 2018 Audi Q5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching