Compatibility of Parts for Military Trailer

Question

Question:

Hi, I have a M101A3 military trailer. Are you able to confirm if the following parts are compatible? -Master Cylinder for Toledo Brake Actuators - 10614 -Replacement Shock Absorber for Toledo Brake Actuators - 1844-2 - Wheel Cylinder - 10inch and 12inch Single Serve LH - BP17-030 -Wheel Cylinder - 10inch and 12inch Single Servo RH - BP17-020 -BP04-160 12inch x 2inch Hydraulic Trailer Brake Shoe and Lining One Wheel Do you sell a replacement spring kit for the brake shoes? thank you

asked by: Simeon R

0

Expert Reply:

The parts you listed will need to be compatible with what is on your M101A3 military trailer, rather than the trailer itself. For example, the Master Cylinder # 10614 and Replacement Shock Absorber # 1844-2 are for Toledo brake actuators; if that is what you have on your trailer, then these parts will work.

The same is true of the Wheel Cylinder - RH # BP17-020 and LH # BP17-030; they are replacements for 10" and 12" single serve brake assemblies manufactured by Dexter, Bendix, Dico, Demco or Atwood and will work if those are the assemblies on your military trailer.

As for springs for your 12" x 2" Hydraulic Trailer Brake Shoe and Lining # BP04-160, they are available. You would want the Shoe Return Spring # BP07-175 and Shoe Hold Down Spring # BP06-090.

I've added links to a couple review videos for you to take a look at as well.

expert reply by: Kyle S

0

Answer 1

While we do have what you need, the part number you asked about is indeed specifically made for Titan brakes. Instead, for 12" x 2" Dexter Duo-Servo hydraulic drum brakes the brakes shoes you need are: - 12" x 2" Hydraulic Trailer…

view full answer...

Answer 2

If you are talking about the small opening on the outside and inside of the Orifice Connector #T1209800 then those measure 0.0010" and 0.0865" respectfully. I went out to the warehouse and measured them with the digital caliper. Please note…

view full answer...

Answer 3

The Orifice Connector for Titan Actuators #T1209800 is not recommended for use with disc brakes; this connector fits Titan Models 6, 10, and 20 Titan actuators for drum brakes.

view full answer...

Answer 4

Orifice Connector #T1209800 is for drum brakes. It is the new style with 1/8" NPT threads. For disc brakes you would need #T4750300. Drum brakes actually do not take the larger hole. Drum brakes require around 1000 psi whereas disc brakes…

view full answer...

Answer 5

The thread size is 3/8"-24 but the fitting size is 3/16". This standard for trailer brake lines. This will go from 1/2 inch thread size to 3/8 inch. If the dimensions you took are 1/2 inch and 3/8 inch of the threads this will fit.

view full answer...

Answer 6

Yes, the Replacement Solenoid Adapter Fitting for Titan Model 10 Brake Actuators, part #T4750200, is for pre-2000 Titan Model 10 brakes. If you have a newer Titan Model 10 brake, you will use the Orifice Connector for Titan Actuators Item #T1209800.…

view full answer...

Answer 7

Yes, the replacement 23744 master cylinder with the 5 underneath is the same as your no longer offered Master Cylinder for Titan Model 10 and 20 Actuators #T2374400 with the 1 underneath. The numbers underneath just denote what manufacturing facility…

view full answer...

Answer 8

The small opening in master cylinder fittings like #T1209800 is designed to provide the proper amount of fluid and pressure through the brake lines. Bleeding trailer brakes manually is difficult. You could use a power brake bleeder, vacuum style…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...