Determining the Correct Replacement Shock for 2001 Thor Wanderer

Question

Question:

will Part # LC283271 trailer replacement shock fit on my 2001 Thor wanderer 5th Wheel trailer.

asked by: Tim L

0

Expert Reply:

In order to determine if the Lippert Replacement Shock # LC283271 will fit your 2001 Thor Wanderer, you will need to remove one of its current shocks and take a measurement. If it has a compressed length of 7-1/2" and an extended length of 12", the Lippert shock will fit.

expert reply by: Kyle S

0

Answer 1

The 052-003-00 number on your current shock is the part number from Dexter Axle. We don't carry the direct replacement but if the specs match for the Lippert Standard Replacement Shock #LC283271 and the axle this is being applied to is a…

view full answer...

Answer 2

If you are looking to add shocks then measure using the following procedure: Compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the shock moves) (B). Then…

view full answer...

Answer 3

The E-Z Flex equalizers like the #K71-653-00 are a nice system, but for your Coachmen Chaparral 391QSMB 5th wheel trailer, the MORryde suspension system you mentioned will absolutely be an upgrade: - MORryde AllTrek 4000 Equalizers for Tandem Axle…

view full answer...

Answer 4

Since you are concerned about dips, RRs, and bumps in curves, I recommend using a shock absorber like #LC283271 or #LC281281 on your 5th wheel trailer. You stated the mounting hardware is already in place, so adding shock absorbers should be easy and…

view full answer...

Answer 5

For the trailer suspension on your 2003 Montana 5th wheel, the closest replacement we have for your Dexter shock absorbers is the Lippert Components Heavy-Duty Replacement Shock #LC283280. This is not a direct replacement. If you want further…

view full answer...

Answer 6

I reached out to my tech contact at Lippert and the Standard Replacement Shock - Black #LC283271 doesn't have a rated capacity but is designed only for use on 2-3/8 inch diameter axles. That axle size is the 3,500 lb axle, so seeing as they are…

view full answer...

Answer 7

Based on my research, your AL-KO T-52 Axle has #42 spindles that use hub assemblies with a #25580 inner bearing and #15123 outer bearing. You will just want to determine the bolt pattern you are needing as well as the axle capacity, as this can vary…

view full answer...

Answer 8

Your AL-KO T-52 axle has #42 spindles that use hub assemblies with a #25580 inner bearing and #15123 outer bearing. The grease seal most often associated with this bearing set is part #GS-2250DL for 1 seal or #RG06-070 for a pair.

view full answer...

Answer 9

Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 are what you will need as replacement shocks. They are 8.625 inches completely compressed and 13.5 inches completely extended so under weight they likely will be right at your 11 inch…

view full answer...

Answer 10

Your Montana 5th wheel trailer will likely use the Lippert Components Standard Replacement Shock - Black Item #LC283271. But to be sure you can remove a shock from the trailer and measure its compressed and extended lengths to determine if it is a…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Determining the Correct Replacement Shock for 2001 Thor Wanderer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching