Replacement Hardware Pieces for the Yakima ButtonDown Ski Rack

Question

Question:

hi, im looking for yakima buttondown rack hardware for crossbars for toyota highlander 2016. what can you recommend ?

asked by: Alex

0

Expert Reply:

The Replacement kits, part # 8830021, includes all of the mounting hardware for the Yakima ButtonDown rack.

Additionally, if you're looking to fit wider crossbars like most factory bars, you'll want part # Y8860040, which provides the universal mount for most crossbars.

Finally, the Replacement Ski Lift Kit, part # 8830017 will let you replace your lifting kits if you need to, while part # Y8860037 will replace the brackets themselves.

expert reply by: Jacob W

0

Answer 1

The ski carrier you have is the Yakima ButtonDown. You need #8830017 for the correct lift kit.

view full answer...

Answer 2

For your early model Yakima PowerHound Ski Carrier, the replacement lift kit you will want is the Yakima PowderHound Ski Lift Kit #8830017. The PowderHound Ski Lift Kit #8830017 is designed to fit older model Yakima PowderHound and ButtonDown ski…

view full answer...

Answer 3

For the regular Yakima ButtonDown you would need to use MightyMounts #Y03590 to attach the carrier to the factory crossbars if they are not larger than 4 inches wide and 1-1/2 inches tall. If you have the ButtonDown Aero then you can use #Y8860040.…

view full answer...

Answer 4

I reached out to my contact at Yakima to ensure we get you the right mounts you need. He told me that for you Yakima Buttondown 4, you will need the Universal MightyMounts for Yakima Roof Mounted Accessories, #Y03590. These MightyMounts will ensure…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The Yakima MightyMounts 4H are no longer available. I contacted Yakima for a solution for you and there are two options. The Universal MightyMounts #Y03590 is one. The benefit here is that if you needed to use them with another Yakima product…

view full answer...

Answer 8

Yes, the Malone DownLoader #MPG114MD-351XL is designed to fit on virtually all available aftermarket crossbar shapes and most factory bars, so this would work well with a Yakima roof rack like the one for a 2016 Avalon that uses parts #Y00425,…

view full answer...

Answer 9

You will want to use the mounting hardware for your ButtonDown 4, part #8830021, as you found on Yakima's site. The mounting hardware #8830021 will fit square crossbars, like the Rhino-Rack Euro Square Bars #RREB126B. According to my contact…

view full answer...

Answer 10

The Thule Hullavator Pro Kayak Carrier #TH898 comes with mounting hardware designed to fit round square, or into the T-Slot of an aero-style roof rack crossbar. If you have the aero-style crossbars and they don't have a T-Slot then you can…

view full answer...

Answer 11

Yes, the Replacement Mounting Hardware for Yakima Roof Mounted Ski and Snowboard Carriers #8830021 will fit your new Thule square crossbars and your old Yakima Ski Carrier.

view full answer...

Answer 12

I did some looking around and we do offer the Replacement 5/16" Hex Key Set for Yakima Roof Mounted Bike Carriers #Y8810041 and the Yakima Replacement 5/16" x 2-1/4" Bolt Package #Y8880010 which will give you four bolts and…

view full answer...