What Size Wrench/Socket is Needed to Tighten Thule Hitch Pin Bolt

Question

Question:

what size wrench do I use to tighten/loosen the snug tight bolt? Thanks.

asked by: Johnson

1

Helpful Expert Reply:

The size wrench or socket for the hitch pin bolt part # 853-5917 is 3/4 inch.

Which we have the socket and ratchet for that size part # PT20104-38524.

expert reply by: Jameson C

1

Answer 1

The Flint Hill Goods Cargo Carrier #FHG49ZR is designed to be used with the threaded hitch pin that it comes with, so a standard, non-threaded hitch pin won't work. The threaded pin is used as an ant-rattle mechanism. If you're looking for a…

view full answer...

Answer 2

I am not aware of any laws regarding altered driving speed limits when a cargo carrier is in use, but it is simple enough to check your local or state laws. Your local highway patrol can likely provide confirmation if there are any such laws in place…

view full answer...

Answer 3

To add lock cylinders to the ratcheting arms on your Thule T2 Classic 2 Bike Rack #TH9045 or other models of the T2 Classic to secure the bikes to the carrier you will just need part #TH450200, which comes with both cylinders and two keys. Since the…

view full answer...

Answer 4

Yes, the etrailer Trailer Hitch Receiver part #e98848 which is what I recommend, is a confirmed fit for a 2023 Honda CR-V Hybrid Sport Touring. It also has a 2" opening so it will be great for towing or other hitch mounted accessories like bike…

view full answer...

Answer 5

You will need the Threaded Anti-Rattle Hitch Pin Lock #e99047 for the Flint Hill Goods 60" x 22" Cargo Carrier #FHG49ZR

view full answer...

Answer 6

We do not have a longer threaded hitch pin option that'll work with the Flint Hill Goods 22" x 60" Cargo Carrier #FHG49ZR however what you could do is use the Roadmaster Hitch Pin and Clip for 2" or 2-1/2" Hitch - 5/8"…

view full answer...

Answer 7

It looks like you purchased the Thule T3 Cradle, #853-5829, and the T3 Strap, #753-3535. These two items should work well together so I made a short demonstration video for you. If you think you may have received a different strap or are missing a…

view full answer...

Answer 8

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Answer 9

I checked with my contact at Thule and verified that the Thule replacement hitch bolt you are looking for is part #908-1240-54. It is a 12 x 40mm hex bolt with a property class of 8.8. It should be installed with M12 washer, #951-1224-54, and M12…

view full answer...

Answer 10

The Thule Snug Tite Hitch Lock #THSTL2 is threaded specifically for the Thule racks listed on its product page. This is the only locking pin offered that is for Thule racks.

view full answer...

Answer 11

The correct replacement hitch pin for a Thule T1 Bike Rack is the Replacement Threaded Pin part #853-5917 or the Thule Snug Tite Hitch Lock and Anti-Rattle Device part #THSTL2 if you prefer locking. There are no other replacement options confirmed to…

view full answer...

Answer 12

The Replacement Threaded Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device #853-5917 is 12mm by 1.75 inches. This is just the threaded bolt, you'll need to use the flat washer, lock washer, and lock assembly to secure it. If you need the…

view full answer...

What Size Wrench/Socket is Needed to Tighten Thule Hitch Pin Bolt

Products Referenced in This Question

Continue Researching