Wiring Adapter to Install Tekonsha Primus IQ Brake Controller TK90160 in 2017 Toyota 4Runner

Question

Question:

Hi I just upgraded by tow vehicle to a 2017 Toyota 4Runner. I have a Tekonsha Primus IQ brake controller and am towing a popup with electric brakes. What Tekonsha plug adapter 2 plugs - brake controller and vehicle do I need? Thanks

asked by: Aubrey W

0

Expert Reply:

You can install your Tekonsha Primus IQ brake controller # TK90160 in your 2017 Toyota 4Runner by using the wiring adapter part # 3041-P.

expert reply by: Adam R

0

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

By all accounts the Curt Spectrum Trailer Brake Controller #C51170 works well and is easy to use and install on most vehicles. It is a brand new item so not a lot of feedback has come in on it. I did learn a few things though after speaking with…

view full answer...

Answer 10

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 11

I do have options for you but we do not carry replacement keys made specially for your 2016 Forest River R-Pod. The only way you are going to be able to replace these keys is by calling the dealer directly. However, there's a chance they…

view full answer...

Answer 12

The Timbren Active Off-Road Bumpstops part #TABSTORSEQ which are a fit for a 2023 Toyota 4Runner are pretty similar to the SumoSprings Solo Custom Helper Springs like part #SS68DR. The Timbrens provide more support but the SumoSprings ride…

view full answer...