4 Lug Wheel Recommendation for Use with Tire Size 175/70R13

Question

Question:

I am looking for a rim for a utility trailer. 175x 70r13 tiresize. rim is a 4 lug 3 1/2, 2 3/4inch pilot hole.

asked by: Steve M

0

Expert Reply:

For a 4 lug wheel designed to fit tire size 175/70R13 we have the part # AM22322HWT which is a 4 lug wheel that has a pilot diameter of 2.8 inches.

expert reply by: Jameson C

0

Answer 1

Most likely what you'll want is a wheel and tire combo like the part #AM3S130 which is a tire size of ST175/80-13 mounted on a wheel with a 4 on 4 inch bolt pattern. But we do need to verify your bolt pattern is 4 on 4 inch. Could I get you…

view full answer...

Answer 2

You can use the 8-1/4-inch overall length of the TruRyde BT8 1-1/2-inch Spindle #TRU97FR to help you determine the correct length for your axle tube. You also need to take into account the width of the tires you intend to use as these also will…

view full answer...

Answer 3

4 on 4 bolt pattern normally maxes out at 13 inch tires. I recommend the Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C #AM3S120. Trailer wheels normally have a zero offset and have taller sidewalls…

view full answer...

Answer 4

For your bolt pattern of 4 on 4 inch the largest wheel and tire size we have is 175/80D13 like the part #AM3S030 which has an overall diameter of 24 inches. This will be right at 6 inches taller than your current tires.

view full answer...

Answer 5

A 4 on 4 inch bolt pattern is measured diagonally on center. The first number indicates the number of lug holes and the second number indicates the diameter of the circle that those holes sit on. Check out the wheel bolt pattern help article that I…

view full answer...

Answer 6

Yes, 8 inch and 12 inch trailer wheels with 4 bolt holes, like parts #AM20011 and #AM20122 respectively, fit the same 4 on 4 bolt pattern. If you're asking because you're replacing hubs on your trailer then it's not quite as simple. The…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 12

Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…

view full answer...

4 Lug Wheel Recommendation for Use with Tire Size 175/70R13

Product Page this Question was Asked From

Continue Researching