Recommendation to Replace Shelby 5408 Trailer Winch

Question

Question:

SHELBY 5408 WINCH Small gear wheel broker tooth.. Replace the gear or the whole winch?

asked by: Dave H

0

Expert Reply:

If the gear is broken on your existing Shelby winch, I recommend simply replacing the entire unit, as Shelby is no longer in business and replacement parts are not readily available.

To replace your Shelby 5408 model, I recommend the Dutton-Lainson Hand Winch with TUFFPLATE Finish # DL14725. This is very similar to your winch that features a 2,000 pound capacity and 2 speeds for horizontal pulling applications. The zinc TUFFPLATE finish will also do a great job of preventing rust and corrosion.

I have attached a video demonstration on this winch so you can see exactly how it looks and operates.

expert reply by: Chris R

0

Answer 1

The max rating of your Shelby 5408B is 1,900 lbs which would be more than adequate for a 2,200 lb boat as typically the ratio for winch capacity to boat weight is 2 to 1. For a similarly rated winch we have the part #DL14627 which is rated for 1,800…

view full answer...

Answer 2

I will be happy to show you the mounting hole dimensions for hand winch #DL14725. I have included a picture that shows them for you. This winch can be used with either a strap, #DL24249, or a cable #DL24104. Straps are much better for marine…

view full answer...

Answer 3

From what I have found, the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs #DL14627 will match the bolt pattern of your Shelby 5407B. I have attached a diagram as well as the dimensional drawing showing the bolt pattern on…

view full answer...

Answer 4

The winch straps we have available are designed to secure to the drum with a bolt like what you mentioned. I have not seen a strap that loops around the drum like what you have pictured. Your best bet is to simply go with a replacement strap that…

view full answer...

Answer 5

It is recommended that winches with a capacity of 2,600 pounds use a strap with a rating of 150 percent of the weight of the winch. The replacement strap I recommend is the 12 foot Long Personal Water Craft Trailer Winch Strap with Safety Hook by…

view full answer...

Answer 6

I do have a recommendation for a winch that will have the same bolt pattern and 400lb weight capacity as your discontinued Shelby Model 5400 winches. I recommend the Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 12' Strap - 400…

view full answer...

Answer 7

The Dutton-Lainson Hand Winch, part #DL14730, is what you are looking for. It has a Maximum Drum Capacity of 9/32 inches x 58 feet and includes a hand brake so it will work perfect for your application. If you end up needing replacement cable, I…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommendation to Replace Shelby 5408 Trailer Winch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching