Replacement Hydraulic Brake Assemblies With Parking Brake Integrated

Question

Question:

dexter part #s 023-341-00, 023-340-00, i need these brake assemblies, do you have a cross reference for them?

asked by: Geoffrey A

0

Expert Reply:

I was able to cross reference with the manufacturer and find the parts you need. I recommend the Dexter Hydraulic Trailer Brake Kit - Free Backing - 12" - Left and Right Hand Assemblies - 7K # 23-342-343 if you don't need the parking brake.

If you want the parking brake, then I recommend the Dexter Free-Backing Hydraulic Trailer Brake Assembly w/ Parking Brake Lever - 12" - Right Hand # T2351200 and Left Hand # T2351300.

expert reply by: Jason S

0

Answer 1

Spread axle trailers are pretty hard on tires when you are turning since the front tires will scrub and wear out quickly, also they are much harder to back up and are harder on suspension components. Spreads do have a little more flexibility with…

view full answer...

Answer 2

This sounds like the trailer brakes are not receiving the signal from the brake controller when you apply the brakes. I believe what is happening is that you may have a loose, broken, or inaccurate connection on the red wire from the brake…

view full answer...

Answer 3

For a single diode to prevent current backfeed the part #RM-790 would be a great option.

view full answer...

Answer 4

The rod and nut for the 12,000 Series Ram jacks is #TJD-12000-RODNUT and the replacement bearing is #TJD-12000-BR.

view full answer...

Answer 5

We had a customer who was able to replace his Dexter 8-155 hubs with the #8-201-5UC3-EZ that you referenced so they should work well for you. You can verify that this hub will work for you by pulling your current hub and making sure they have inner…

view full answer...

Answer 6

The pilot diameter is measured as the diameter of the large hole in the center of the wheel. The Dexstar #AM20790 steel dual trailer wheel you referenced has a 4.88 pilot diameter. So which pilot diameter would you need? To figure that out, I would…

view full answer...

Answer 7

Pilot diameter on a wheel like our dually trailer wheel part #AM20783 that you referenced is basically the diameter of the center hole of the wheel. This wheel has a pilot diameter of 4.75 inches. I attached a picture that shows this dimension as…

view full answer...

Answer 8

Yes, the Kodiak Disc Brake Caliper #KDBC250D will fit the caliper bracket that comes in the HydraStar Disc Brake Kits, like Kit #HSE7K-T1. We also have the Stainless Steel Kodiak Disc Brake Caliper #KDBC250S and Stainless Steel Ceramic Brake Pads…

view full answer...

Answer 9

There isn't a way to convert a latch, and there aren't any yoke latch repair kits unfortunately, so the best we can offer is a replacement A-frame coupler. If you want to stick with the yoke-style latch you can use the 8,000 lb A-Frame…

view full answer...

Answer 10

The 77-1210-2 braking assembly and 23-450/23-451 braking assembly are different sizes from my research, the former measures 12" x 3-3/8" whereas the latter measures 12-1/4" x 3-3/8". If you're looking for replacements we have…

view full answer...

Answer 11

There are only a handful of brake assemblies that have the provisions to add a parking brake and #AKEBRK-35 or #AKEBRK-35-SA do not have that feature. Dexter electric brake assembly kit #K23-086-087-00 does have the ability to add a parking brake…

view full answer...