Recommended Weight Distribution System For Dump Trailer With I-beam Frame
Question:
I am contemplating a purchase of a pj low profile dump trailer, low profile. 14k lbs. It has 8inch I- beams . What weight distribution system would u recommend?
asked by: Mark
Expert Reply:
The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big will result in a stiff, uncomfortable experience.
I-beam trailer frames do pose a problem with weight distribution systems. You will need to modify the trailer in order for a weight distribution system to work. You will need to weld steel plates to the I-beam so the brackets can be attached.
The tongue weight of your trailer will probably be somewhere between 1400 and 2100 lbs. The weight distribution system we offer that can handle that weight would be the TorkLift SuperHitch Everest # TLWD1000. This system is designed for tongue weight between 1500 and 3000 lbs.
You will also need an adjustable shank to use with the system. I have attached a link to the dual-shanks like # TLM9011 and # TLM9010.
The hitch ball is not included so you will need a hitch ball with a 1-1/4 inch shank. I have attached a link to the hitch balls we offer you can check out.
Using the # TLWD1000 will require a dual-hitch trailer hitch on the towing vehicle. I have attached a link to the two receiver trailer hitches we offer. If you let me know what the year make and model vehicle you are planning on using to tow the trailer I will see if we have a trailer hitch that will work for you.
Products Referenced in This Question
Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution - 12-1/2" - 30,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 2000 lbs TW
- 20000 lbs GTW
- Fits 2 Inch Hitch
- SuperHitch
- TorkLift
more information >
Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 3000 lbs TW
- 30000 lbs GTW
- Fits 2 Inch Hitch
- SuperHitch
- TorkLift
more information >
Product Page this Question was Asked From
TorkLift SuperHitch Everest Weight Distribution System - 30,000 lbs GTW, 3,000 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 1600 lbs
- 1700 lbs
- 1800 lbs
- 1900 lbs
- 2000 lbs
- 2100 lbs
- 2200 lbs
- 2300 lbs
- 2400 lbs
- TorkLift
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: TorkLift SuperHitch Everest Weight Distribution System - 30,000 lbs GTW, 3,000 lbs TW
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Q&A: Installation of the Reese Friction Sway Control on Both Sides of a Dutchman Trailer
- Q&A: Can Brackets for TorkLift SuperHitch Everest be Cut and Welded to Larger Trailer Frame
- Q&A: Number of Sway Controls to Use on a 27ft Travel Trailer
- Shop: Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs
- Shop: Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution - 12-1/2" - 30,000 lbs
- Shop: TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Shop: Trailer Hitch
- Shop: Replacement L-Brackets w/ Mounts for Blue Ox TrackPro and 2-Point Weight Distribution - Qty 2
- Shop: Replacement Frame Brackets for Curt TruTrack Weight Distribution System w/ Sway Control
- Q&A: Distance Between the Dual Shanks of the Adjustable Shank # TLM9010
- Q&A: Does Torklift Everest Weight Distribution Shank Fit Other Brand Systems
- Q&A: Can a Weight Distribution System Be Used with a Pintle Hitch
- Search Results: tlwd1000
- Search Results: tlm9010
- Shop: Base Plate for Tow Bar
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: weight distribution hitch
- Shop: Brake Controller
- Search Results: brake controller
- Article: My Trailer Hitch Doesn't Fit
on Weight Distribution Hitch
