Larger Drop Weight Distribution Shank Recommendation for 2015 GMC Yukon Towing Camper  

The minimum drop of the Equal-i-zer Weight Distribution Shank part #EQ94FR is 4".

Looks like you are in need of a drop shank for your weight distribution system to allow your trailer to be towed level. The Equalizer Shank part #EQ90-02-4400 can do a drop of up to 9 inches so it would work well for you as it looks like you need…

Since your truck has a lift, and without a lift it sits up pretty high I would recommend a shank that fits the 2.5 inch hitch size with a bit more drop in the shank like the #EQ90-02-4900 which can do a drop of up to 6 inches or the part #EQ94FR…

The Equal-i-zer Weight Distribution Shank part #EQ94FR is what I recommend using for a 2-1/2" hitch where extra drop is needed. It offers up to 9" drop which should be plenty for most truck and trailers combos. It's cross-compatible so…

We have a few options for replacement weight distribution shanks that fit both the Fastway weight distribution system you have as well as the 2-1/2 inch hitch on your vehicle. We have the #EQ90-02-4700 which can do up to a 3 inch drop, #EQ94FR which…

The Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop - 600 to 1,600 lbs TW #EQ90-02-4900 is a great option for a hitch with a 2-1/2 inch receiver and it will step down to fit the e2 system you have perfectly. This shank…

Between using a reducer sleeve and upgrading your weight distribution shank, I recommend going with a weight distribution shank designed to fit the 2-1/2 inch hitch receiver on your 2015 Ram 2500HD. Using a 2/1/2 inch shank, like #EQ90-02-4800, for…

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

That sounds right to me Travis, but while you have everything pulled out it wouldn't hurt to re-measure and double-check. The height shouldn't have changed and everything should essentially go as you've described, but If it were me…