Will Strong Arm Jack Stabilizer Kit Work With Hydraulic Auto Leveling System?

Question

Question:

2016 forest river Vengeance touring edition 40D12 with 6 point Level Up hydraulic auto leveling system. with this product work on my trailer? Is their a real benefit of getting this. any and all info is appreciated.

asked by: Brock

0

Expert Reply:

Yes, the JT's Strong Arm Jack Stabilizer Kit # LC191023 will work with your 2016 Forest River Vengeance with the use of six Strong Arm Jack Stabilizer Adaptor Lugs # LC314592 as long as the front two landing gear legs are at least 58 inches apart. The kit will be beneficial in furthering stabilizing and preventing movement in any RV while at it's destination, and particularly one the size of your Forest River.

expert reply by: Kyle S

0

Answer 1

Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lugs #LC314592 come 2 to a set. So for 6 jacks you would need 3 sets. If you are talking about the Lippert Components JT's Strong Arm Jack Stabilizer Kit #LC191023 you would…

view full answer...

Answer 2

You'd need a set of the #LC191023 for each leg of your landing gear that you will be installing the JT's Strong Arm Jack Stabilizer Kit #LC314592 on. So you'd need two sets.

view full answer...

Answer 3

Yes, the JT's Strong Arm Jack Stabilizer Kit #LC191023 are compatible with the hydraulic auto level system on your 2021 Forest River Riverstone Reserve 2850RK 5th wheel. You will need to add the Hydraulic Jack Adapter Lugs #LC314592 to be…

view full answer...

Answer 4

No, you need to use the Adaptor Lug #LC314592 with your round landing gear foot pad when installing the JT's Strong Arm Jack Stabilizer Kit #LC191023. The weld-on lugs will ensure the proper support and stability necessary for the stabilizer…

view full answer...

Answer 5

The Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, #LC191023, will help to stabilize your Keystone Montana RL. I contacted Lippert who manufactures the Level Up system you are referring to and…

view full answer...

Answer 6

I attached a picture that has the install instructions for the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug #LC314592 that you referenced to show you how it installs. They can be welded or bolted to the feet.

view full answer...

Answer 7

If you have the LCI Level Up System you can use the Adapter Lugs #LC314592 with the JT's Strong Arm Jack Stabilizer Kit #LC191023 (which is the correct kit if you have 58 inches or more between the two front landing gear legs). I have added a…

view full answer...

Answer 8

Tri Pods do give you a major boost in stabilization, but a system like the JT Strong Arm Stabilizer Kit #LC191025 will be much more stabilizing. Why? Well you are taking your current jack and adding two separate components, creating a larger spread…

view full answer...

Answer 9

Sounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer. Yes, the JT Strong Arm Stabilizer System #LC191023 will work with your LCI Level Up System. I checked with Lippert and found that you can use the JT's…

view full answer...

Answer 10

It all depends on where you place the rear jacks for Lippert Ground Control 3.0 system #LC358590. I do not believe that the main landing gear legs would be a problem since they will be right at the front under the overhang. Most likely you will not…

view full answer...

Answer 11

The Roadmaster Comfort RIde Leaf Spring Suspension Kit w/ Shocks is going to give you the better ride between the two and is the best option available. The Silent Ride is a nice upgrade but it is not as comprehensive as the Roadmaster. It also…

view full answer...

Answer 12

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

view full answer...