Lippert Components JT's Strong Arm Jack Stabilizer Kit for a 5th Wheel Trailer with 6 Jacks

Question

Question:

How many kits are required for 6 leveling jacks. We are getting a 2018 grand design solitude 373fb. I need part number and hardware required

asked by: Renae

0

Expert Reply:

Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lugs # LC314592 come 2 to a set. So for 6 jacks you would need 3 sets. If you are talking about the Lippert Components JT's Strong Arm Jack Stabilizer Kit # LC191023 you would need 1 kit per set of jack legs. But I recommend using 1 kit with the front landing gear then, if needed, add other stabilization products.

expert reply by: Michael H

0

Answer 1

The Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, #LC191023, will help to stabilize your Keystone Montana RL. I contacted Lippert who manufactures the Level Up system you are referring to and they…

view full answer...

Answer 2

Yes, the JT's Strong Arm Jack Stabilizer Kit #LC191023 will work with your 2016 Forest River Vengeance with the use of six Strong Arm Jack Stabilizer Adaptor Lugs #LC314592 as long as the front two landing gear legs are at least 58 inches apart.…

view full answer...

Answer 3

I attached a picture that has the install instructions for the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug #LC314592 that you referenced to show you how it installs. They can be welded or bolted to the feet.

view full answer...

Answer 4

Tri Pods do give you a major boost in stabilization, but a system like the JT Strong Arm Stabilizer Kit #LC191025 will be much more stabilizing. Why? Well you are taking your current jack and adding two separate components, creating a larger spread…

view full answer...

Answer 5

If you have the LCI Level Up System you can use the Adapter Lugs #LC314592 with the JT's Strong Arm Jack Stabilizer Kit #LC191023 (which is the correct kit if you have 58 inches or more between the two front landing gear legs). I have added a…

view full answer...

Answer 6

No, you need to use the Adaptor Lug #LC314592 with your round landing gear foot pad when installing the JT's Strong Arm Jack Stabilizer Kit #LC191023. The weld-on lugs will ensure the proper support and stability necessary for the stabilizer kit;…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Lippert Components JT's Strong Arm Jack Stabilizer Kit for a 5th Wheel Trailer with 6 Jacks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching