Yakima Accessory Lock Housing - Same Key System (SKS) Compatible

See what our Experts say about this Yakima Accessories and Parts

• What Size Bolt Does the Yakima Accessory Lock Housing Part # Y07220 Use
  The washer you are referring to is actually an o-ring. This is going to help keep cushion the lock core as well as protecting the threads from dirt and debris. It is not a requirement but will be a good idea to use. You can always pick up an assortment of them at any local auto parts store. The lock will only work with a 5/16" diameter bolt.
  view full answer...
• Can Yakima Roof Accessories that Use Mighty Mounts be Locked to Roof Rack
  To lock the High Roller to a set of crossbars using a mighty mount adapter will only require the # Y07220. I attached a picture of how it installs to the mighty mount and locks the rack to the crossbar.
  view full answer...
  
• Does the Yakima Accessory Lock Housing Fit the Raptor Aero Bike Rack
  Yes, I checked with Yakima and you can use lock housing # Y07220 with the Raptor Aero Y02093. The actual lock part that fits inside this housing is sold separately using # Y07202.
  view full answer...
• Will Older Mighty Mounts Work on New JetStream Bars?
  I called Yakima to check with them since the 9v and 10 v Mighty Mounts you're referring to have been discontinued. According to Yakima, the new JetStream bars are larger and more aerodynamically shaped compared to the older style of crossbars that the Mighty Mounts were created for, so they most likely will not fit. The closest alternative are Yakima's Universal Mighty Mounts # Y03590. These can be secured with Lock Housing # Y07220 and SKS Lock Cores # Y07204.
  view full answer...
• Locking Mechanism for an Older Yakima Bike Rack
  The only close part that we have is part # Y07220 which was used on older versions of Yakima rooftop bike racks that used the MightyMount system for connecting to the roof rack. I've included a picture of what this looked like installed.
  view full answer...
  
• Wheel Mount Roof Mounted Bike Rack Suggestion for 2011 Nissan Rogue
  When the SportRack # SR1098 Crossbars are installed on your 2011 Nissan Rogue, you'll be able to move the crossbars forward enough that the rear hatch would have no problem clearing the Yakima # Y02103 FrontLoader roof mounted bike rack. If it should present a problem, the rack can be installed backwards to provide more clearance. The FrontLoader includes a integral cable lock and can be locked to the roof rack, but the lock cores are sold separately. To lock the bike rack to the crossbars,...
  view full answer...
• Are Mighty Mounts Needed for Yakima Accessories on 2019 Honda Ridgeline?
  I checked with Yakima and the Mako Saddles and Yakima HullyRoller Roof Rack Kayak Carrier Y04035 will require you to use the Universal MightyMounts # Y03590 with your '19 Ridgeline; the other mounts you mentioned would not work. If you were looking to secure your Mighty Mounts you can do so with Lock Housing # Y07220 and SKS Lock Cores # Y07204.
  view full answer...
• Recommended LoadWarrier Basket Loadbar And Locks For Using FrontLoader Bike Racks
  The Yakima LoadWarrior Roof Rack Cargo Basket # Y07070 has the rear bar as you mentioned. To add the second bar, I recommend the Extension for Yakima LoadWarrior Roof Rack Cargo Basket # Y07074 which adds 18 inches to the basket and also adds the crossbar. This already combined in the Yakima LoadWarrior Roof Rack Cargo Basket with Extension Kit # Y07070-74. You can add a load bar with the Replacement Loadbar For Yakima LoadWarrior # 8870042 to the smaller rack if you don't need the extra...
  view full answer...
• How To Make The Yakima Hully Rollers Kayak Carrier Compatible With Aero Crossbars
  In order to install the Yakima HullyRoller Roof Rack Kayak Carrier part Y04035 on the roof of your 2015 Jeep Grand Cherokee using the the Thule AeroBlade Edge Roof Rack part # TH7602B-TH7602B, you will need to use the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590. The MightyMounts are designed to allow for the use of aero crossbars while using the HullyRoller. In order to lock the HullyRoller to your crossbars, you will need both the Yakima Accessory Lock Housing...
  view full answer...
• Parts Needed to Lock the Universal MightyMounts for Yakima Roof Mounted Accessories to a Roof Rack
  The Replacement Locking Knob Assembly for Yakima Raptor Aero Roof Mounted Bike Carrier # Y8820181 is a replacement part for a Yakima Raptor bike carrier, it attaches to the clamp on that carrier. It does not actually lock the rack to the crossbars. To lock the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 to your roof rack you would need to get the Yakima Accessory Lock Housing # Y07220 and the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Recommended Tandem Bike Rack for 2012 Acura RDX
  There are limited options for a tandem bike. I recommend the Thule Tandem Bike Carrier - Fork Mount # TH558P because the design gives you the ability to load it and unload it from your roof easier. The length of the tandem bike requires a roof top mount instead of a hitch mount option. I've attached a video to assist. For additional security you can add the Yakima Accessory Lock Housing - Same Key System (SKS) Compatible # Y07220 and lock cores # Y07204. If you already have crossbars...
  view full answer...
  
• Thread Size Of Tightening Knob On Hi-Lift Jack Holder Brackets
  The thread size of the tightening knob on The Hi-Lift Jack Holder Brackets for Rhino-Rack Pioneer Platform Rack - Top Mount # RR43219 is 1.5 mm. The stud bolt can not be used with The Yakima Lock Housing # Y07220. I attached a review video link below.
  view full answer...
• Is There a Way to Lock Yakima Shovel Mount Y07078
  I really wish there was an SKS style way to lock the shovel using the # Y07078 to your roof basket but unfortunately there isn't. If the shovel had a handle with a opening you could run a cable lock through it like part # e98891 though. You'd want to route the cable through the handle of the shovel and then around one of the bars on the basket as well.
  view full answer...
• Seeking Yakima Raptor Aero Bike Rack Square Bar Mounting Hardware
  To allow the Yakima Raptor Aero Bike Rack Y02093 to fit on square crossbars you will need the Yakima SnapAround Mounting Brackets (SNARs) - Round and Square (QTY 4) # Y8810135. These are confirmed to fit and work well with your Raptor bike racks and square bars. If you want the locks you can use the Yakima Accessory Lock Housing - Same Key System (SKS) Compatible # Y07220 (one for each rack) and then use the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202.
  view full answer...
  
• Recommend Yakima Multimounts and Locks on 2017 Subaru Factory Roof Rack
  The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 will work as long as your factory crossbars are 4 inches wide or less and under 1-1/2 inches tall. To secure the mounts with locks, you will want the Yakima Accessory Lock Housing - Same Key System (SKS) Compatible # Y07220 and cores # Y07204. The height shouldn't be an issue, but you will want to ensure you have at least 1-1/2 inches of clearance between your bars and roof to confirm.
  view full answer...
• Replacement Yakima Mighty Mounts For Old Ski Rack
  The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 will be compatible with your Ski Rack and crossbars. If you want the locking assembly, I recommend the Yakima Accessory Lock Housing - Same Key System (SKS) Compatible # Y07220 along with the Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202.
  view full answer...
• Can I Use Yakima Accessory Housing Lock on an EZ Rec Rack
  I may have a security solution for you, but the Yakima Accessory Lock Housing # Y07220 was designed to replace the knobs on Yakima accessories,. Unfortunately it has not been tested with an EZ Rec Rack and since we do not offer that product line, we really have no way of knowing whether or not it would work. I also wasn't able to determine compatibility when I checked out the EZ Rec rack. However, you could just use a cable lock like the Yakima Same Key System (SKS) Cable, 9' Long (Lock...
  view full answer...
• Yakima Mighty Mounts Compatible With 2017 Subaru Forester OEM Crossbars
  According to my contact at Yakima, the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 are the best mounts for your 2017 Subaru Forester with OEM crossbars. These mounts can be locked to your bars using the Yakima Accessory Lock Housing - Same Key System (SKS) Compatible # Y07220 along with the Yakima Same Key System (SKS) Lock Cores (QTY 4) # Y07204
  view full answer...
• What Parts do I Need to Fit My Yakima HullyRoller to My Thule AeroBlade Crossbars?
  In order to install the Yakima HullyRoller Roof Rack Kayak Carrier to your 2019 Subaru Impreza with Thule AeroBlades, you will need to use the Universal MightyMounts for Yakima Roof Mounted Accessories part # Y03590. The MightyMounts are designed to allow for the use of aero crossbars while using the HullyRoller. In order to lock the HullyRoller to your crossbars, you will need both the Yakima Accessory Lock Housing part # Y07220 and the Yakima Same Key System part # Y07204. If you need...
  view full answer...
• Solution to Lock Thule Big Mouth to Yakima Crossbars of Mazda 3
  For your application your best bed would be a Yakima cable lock part # Y07238 which you can route through the bike frame and then around the crossbars of your roof rack to lock it in place.
  view full answer...
• Is the Yakima BasketCase Hardware Compatible with Lock Housing Y07220
  Yes, the Yakima Accessory Lock Housing # Y07220 would be compatible with the bolts that come with the Replacement Hardware # Y8870043.
  view full answer...

Do you have a question about this Accessories and Part?