Availability of Trimmer Rack for Open Utility Rack

Question

Question:

Hi, can just one side of this kit be purchased? I am only looking for one rail with a trimmer rack, and having a hard time finding it. Thanks!

asked by: Kirsten

0

Expert Reply:

If all you need is the trimmer rack the best option would be to go with the part # RA-6RL which is two uprights that allow you to carry up to 3 trimmers.

I attached a review video for this rack for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

When it comes to installing The Timbren Rear Suspension Enhancement System #TFRRGR on your 2020 Ford Ranger they come in a pair. The Timbren springs has a 6,000 pound weight capacity, and no drilling is required during the installation. I attached an…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part #MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have attached a photo below with this as well.

view full answer...

Answer 5

Mad-Ramps states that the part #MR54FR is best suited for ATVs/UTVs with one row of seats but if the width of your golf cart is less than 60 inches and the wheel base is less than 88 inches this would work for you.

view full answer...

Answer 6

We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack #PK-BMH. The…

view full answer...

Answer 7

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

view full answer...

Answer 8

I went out to the trailer on which we installed Pack'em trimmer rack #PK-6 and found that the mounting holes are 10 inches apart on center.

view full answer...

Answer 9

I checked with our contact at Packem and he informed me that they usually recommend using 5/16 x 1-1/2 bolts that are grade 5 or 8 with flat washers and matching lock nuts to install their racks like the part #RA-6RL that you referenced.

view full answer...

Answer 10

The easiest way to find a replacement is find the dimensions of the hole that the latch sits it.The Flush Locking Stainless Steel Latch, part #L1833. The latch fits in a 2-3/4 inch by 3-3/4 inch hole and features an inside release. The larger #L3980…

view full answer...

Answer 11

The leaf spring hanger positions are largely dependent on which equalizers and leaf springs you will be using. For example, if you were to use the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs part #APT3 with the 5-Leaf Double-Eye Spring for…

view full answer...

Answer 12

The difference between the Pack'Em Shovel Rack #PK-BM-23 and the Shovel Rack for Pack'Em Racks #PK-23 is that the #PK-BM-23 comes with the #PK-23 and a Tower Kit #PK-BM. The #PK-BM is basically the foundation for the #PK-23 and can be ordered…

view full answer...

Availability of Trimmer Rack for Open Utility Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching