What is the Difference Between the # PK-BM-23 and the # PK-23

Question

Question:

What is the difference between this item and a plain pk-23

asked by: Ted

0

Expert Reply:

The difference between the Pack'Em Shovel Rack # PK-BM-23 and the Shovel Rack for Pack'Em Racks # PK-23 is that the # PK-BM-23 comes with the # PK-23 and a Tower Kit # PK-BM.

The # PK-BM is basically the foundation for the # PK-23 and can be ordered separately.

If you do not already have a # PK-BM already you would want to go ahead and get the # PK-BM-23.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as…

view full answer...

Answer 4

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 5

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Answer 6

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going…

view full answer...

Answer 7

The best option for suspension enhancement for your 2022 Chevy Silverado 6500 to help with its sag is going to be Timbrens to help support the added weight in the rear. The correct part number for your Chevy is the following: - Timbren Rear…

view full answer...

Answer 8

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 9

Yes, the Curt Trailer Hitch Receiver #C96NR is confirmed to fit your 2023 Jeep Grand Cherokee. This is a class III receiver rated for up to 750lbs of tongue weight and able to tow up to 7,500lbs. Be sure to check with your owners manual for your…

view full answer...

Answer 10

According to my contact at Firestone, their rear axle air bag kit F2535 is not a fit for your 2017 Ford F-250 diesel 4X4 but we do have options. Air Lift offers a confirmed fit in a 5th-wheel-compatible rear air bag kit, part #AL57399, which provides…

view full answer...

Answer 11

The diameter of the holes on the 6 Slot Tool Rack #TH6B where a shovel would insert is 2 inches. Overall this measures 33-1/2 inches. The mounting holes are 31-3/4 inches apart.

view full answer...

Answer 12

Right hand thread means that they tighten turning clockwise like what you have. Older vehicles and trailers used to put left hand threaded lugs on one side of the trailer and right hand on the other. The thinking back then was that they all had to…

view full answer...

What is the Difference Between the # PK-BM-23 and the # PK-23

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching