Where To Place the Leaf Spring Hangers On a Tandem Axle Trailer
Question:
I have two 6000 pound axles for a trailer we are building.... we have the rough placement front to rear for load carrying. What we dont know is how to space the hanger brackets etc.
asked by: Jody B
Expert Reply:
The leaf spring hanger positions are largely dependent on which equalizers and leaf springs you will be using. For example, if you were to use the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs part # APT3 with the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles part # e34SR. The front and rear leaf spring hanger would need to be placed 29-1/2" in front and behind the center leaf spring hanger. The center leaf spring hanger would then need to be placed in between the two axles. I recommend you verify the axle placement using the photo below.
If you purchase any of the trailer hanger kits from us like the above, the recommended leaf spring and hanger spacing will be listed.
Products Referenced in This Question
5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 6000 lbs
- 1-3/4 Inch Wide
- 5 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: Placement of Front and Rear Hangers When Building a Tandem Axle Trailer
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Q&A: Length of 6-Leaf Double-Eye Spring # e64SR
- Shop: Bulldog Square Jack - Drop Leg w/ Spring Return - Sidewind - 26" Lift - 12,500 lbs
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: Rear Hanger for 3" Wide Slipper Springs - 7-11/16" Tall - 1/2" Bolt Hole
- Shop: Trailer Hitch
- Search Results: leaf spring hanger
- Search Results: hangers
- Video: Redline Trailer Suspension - Leaf Spring Suspension - E4139 Review
- Q&A: Installation of Hanger Brackets and Springs for Tandem Trailer Axles
- Search Results: ce23003
- Search Results: e64sr
- Search Results: 7000 lb leaf spring
- Q&A: Hanger Distance Recommendation for Trailer Leaf Spring that Measures 25-1/4 inches
- Q&A: Spring Hanger Spacing for the Hanger Kit # APS1 with PR4B Springs
- Q&A: Tandem Axle Hanger Spacing for Double Eye Springs 25-1/2 Inches
- Q&A: Determining Spring Hanger Spacing for Tandem Axle Trailer Fabrication Project
- Video: Review of etrailer Trailer Leaf Spring Suspension - 6 Leaf Double Eye Spring 7000 lbs Axle - e64SR
- Shop: Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Side Load
- Shop: Replacement Sidewind Handle for Bulldog Heavy-Duty Trailer Jacks - 13-1/2" Radius - Black
- Search Results: 8000 lbs axle
- Search Results: dexter 8000 lb axle
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Shop: Ladder Rack
- Shop: Mud Flaps
- Video: Pop and Lock Tailgate Lock Installation - 2011 Chevrolet Silverado
- Shop: Truck Bed Tailgate Assist