Comparing the Curt and Draw Tite Hitches for a 2009 Ford Fusion

Question

Question:

what hitch for my fusion

asked by: Rr

0

Expert Reply:

We have the Curt # C11329for your 2009 Ford Fusion.

Curt also requires a stabilizer strap like part # 18050 for unsupported loads like bike racks or cargo carriers.

expert reply by: Jameson C

0

Answer 1

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 2

To safely transport your 2 bikes with your 2019 Ford Fusion your best option will be with a trailer hitch and hitch-mounted bike rack. Because of the spoiler you mentioned and overall rear design of the 2019 Ford Fusion, there isn't a standard…

view full answer...

Answer 3

Curt requires the use of their stabilizer strap part #18050 when using their hitch #C11390 to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. Also attached an install video for the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 11

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 12

Good morning, Rich. I do have one resource which you should find helpful. I am sorry to say that at this time we do not have any pictures of videos of the Curt #C62ZV hitch being installed on a Cadillac Lyriq. Reason being we have not had this…

view full answer...

Comparing the Curt and Draw Tite Hitches for a 2009 Ford Fusion

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching