Why Doesn't the Lippert Scissor Stabilizer Jacks # LC285344 Lower Itself From Weight of Trailer

Question

Question:

what keeps this jack from backing down when weight is applied?

asked by: Dwayne O

0

Expert Reply:

The friction in the threads of the screw on the Lippert Scissor Stabilizer Jacks with Handle # LC285344 keep it from allowing itself to unscrew and lower itself. When the weight of the trailer pushes horizontally on the threads of the jack it does not allow it unscrew itself.

expert reply by: Jameson C

0

Answer 1

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 2

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 3

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 4

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 5

Yes, the Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are definitely an upgrade over standard trailer stabilizers. The drop down feature makes it a lot quicker to get the jacks up and tucked out of the way so they don't catch when the…

view full answer...

Answer 6

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack #LC298707.

view full answer...

Answer 7

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 8

There isn't a way to rotate the mount in relation to the foot direction of the stabilizer scissor jacks part #JSC-24 and since none of our options are setup like that our best solution would be the #LC285344 which has a round mounting bracket on…

view full answer...

Answer 9

Yes, the Draw-Tite Trailer Hitch item #DT58GR does fit the 2022 Lexus RX350s. This hitch is custom fit and bolts directly to your RX 350 with included hardware. I have linked a picture and an installation video below so you can follow along with the…

view full answer...

Answer 10

For a 2006 Forest River Cardinal 5th wheel trailer I recommend the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors #UF39-941705. This motorized jack can help support the rear of your trailer and get rid of the springboard feeling you get…

view full answer...

Why Doesn't the Lippert Scissor Stabilizer Jacks # LC285344 Lower Itself From Weight of Trailer

Product Page this Question was Asked From

Continue Researching