Towing Mirror Recommendation for 2004 Toyota Tundra

Question

Question:

Will this mirror fit an 04 Toyota Tundra? Thanks!

asked by: Ashli

0

Expert Reply:

I have a similar slip-on towing mirror that is a fit for your 2004 Toyota Tundra, but it's not the part # 11501 which is designed for Ford trucks.

Instead you would want the Longview mirror part # CTM4000 which is a confirmed fit.

expert reply by: Jameson C

0

Answer 1

The CIPA Deluxe Door Mount Towing Mirror, #11650, is a universal fit towing mirror that will work well on your 2002 Toyota Tundra, however, if you are looking for a towing mirror that will be the best fit for your truck, you may want to check out the…

view full answer...

Answer 2

For your 2003 Toyota Tacoma I recommend the K-Source Universal Dual Lens Towing Mirrors #KS3990. These custom fit mirrors will fit mirrors that measure 4-1/2 inches to 11-1/2 inches tall. I've attached a video to show how they'll fit onto a…

view full answer...

Answer 3

Currently the only option in a custom-fit towing mirror for your 2006 Toyota Tundra with heated electric OEM mirrors is the Longview #CTM4000 which is indeed a slip-on type. Your other option will be a universal-fit towing mirror. The link at right…

view full answer...

Answer 4

According to Longview Towing Mirrors, their #CTM4000 will fit 2001-2007 Toyota Sequoia models with the manual, electric or heated mirrors. I have confirmed this via a phone conversation with my Longview representative. I have linked you to a product…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

I checked with Timbren just now and for your 2004 Toyota Tundra they recommend the #TTORTUN4 so that would be the correct part number. We put an extra T in front of the part number but it's the same thing.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...