Replacement Fabric for 16 Foot RV Awning

Question

Question:

need replacement fabric for 16 ft awning

asked by: Steve M

0

Expert Reply:

We have the following Solera 16 foot replacement awning roller and fabrics:

Solid Black # LCV000211487
Black Fade # LCV000211486
White Fade # LCV000211492
Sand Fade # LCV000223189
Sand Fade with Weather Guard # LCV000223163

All are direct replacements for Solera awnings.

expert reply by: Charles S

0

Kevin P.

8/3/2020

I just ordered and received the LCV000223189 new awning roller 16’ solara. It doesn’t seem to connect with my current arms on my 2012 Jayco Featherlight 23 rb hybrid trailer. What arms will be compatible with this roller I purchased. Thank you!

Reply

Jon G.

8/12/2020

Basically any of the flat or pitched awning arms will work with the Solera 16' Sand Fade RV Awning Roller and Fabric # LCV000223189 that you purchased. You just need to determine how much room you have for the awning arms and filter through the linked selection. For example, the 69" Support Arms # LC434727 need 69" of unobstructed area from the awning rail straight down.

Helpful Links

dept-pg-accessories_and_parts-sf-rv_awnings-pt-arms.aspx

Reply

Answer 1

Thanks for the picture of the label on our Lippert awning based on that what you have is the part #LCV0002231 and for replacement fabric you'd need the part #LCV000334398.

view full answer...

Answer 2

Hello! Since you measured your roller bar and fabric to be 16' wide, you are correct that the 16' Solera 16' #LCV000223163 is the correct replacement roller bar and fabric.

view full answer...

Answer 3

Thanks for that part number, and due to that I was able to verify the exact replacement LED light strip for you. The V000305374 is the 21' Wide Roller and Fabric w/ LED Kit for Solera RV Awnings #LC94HD, and the exact replacement for the LED…

view full answer...

Answer 4

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 5

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...

Answer 6

To get power to the controller of your Solera Smart Arm 12V Power RV Awning part #LC759404, you need to tap into an existing circuit, or run a power wire from the battery with an inline fuse holder, and a 15 amp fuse, like part #SWC9538, and part…

view full answer...

Answer 7

Sorry Jennifer, I am a bit confused as you were looking at the Replacement U-Clamp Bracket #RM-B141 which mounts with bolts and not U-bolts. This part works with the Split Bushing #RM-205217-10 for the discontinued Roadmaster Front Anti-Sway Bar…

view full answer...

Answer 8

Hi Joe, The Blue Ox Base Plate Kit #BX1139 is a confirmed fit for your 2024 Jeep Wrangler Rubicon X per Blue Ox. I don't currently have an installation video on a model with a steel bumper but I did measure from the mounting holes down to the…

view full answer...

Answer 9

I spoke with Lippert in regards to your blinking touchpad on your Solera Smart Arm 12V Power RV Awning - 20' Wide #LC517517, and they explained to me that the reason that your touchpad is blinking is because a level 2 fault was detected. These…

view full answer...

Answer 10

There is a way for you to find out exactly where to place the center hanger of your 18 foot tandem axle trailer. If you take a look at the diagram I added, which is part of a help article I also linked on how to determine where to put your…

view full answer...