Coupler Lock for Demco Channel Tongue Trailer Coupler # DM13203-52

Question

Question:

What of coupler lock is to be used on part DM13203-52

asked by: Richard K

0

Expert Reply:

You can use the etrailer.com Coupler Lock # e98894 if you are looking to keep your trailer from being coupled to. If you are looking for a lock that prevents it from being uncoupled then that would be the part # e98888.

Either of these are great options to help secure your trailer with the Demco Channel Tongue Trailer Coupler # DM13203-52 and deter theft.

expert reply by: Jon G

0

Answer 1

I have a couple of options that would work for you. If the trailer is sitting around not coupled to anything, and you're wanting to prevent an unauthorized person from coupling it and driving off, use #e98894. If you're wanting to…

view full answer...

Answer 2

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 3

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

view full answer...

Answer 4

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 5

Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler #DM13203-95 or #DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide…

view full answer...

Answer 6

Dexter makes module adapters to connect the BrakeRite #DX82KR to Ford and Chevy OEM controllers, but unfortunately does not for Ram so you'll need to install an aftermarket EOH brake controller. The OEM module adapters typically have a delayed…

view full answer...

Answer 7

The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…

view full answer...

Answer 8

From what we have found, the Nissan factory brake controller harness has the following color/functions: Nissan Red to brake controller black for 12-volt power Nissan Red with green tracer to controller red for input from stoplight Nissan black to…

view full answer...

Answer 9

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a 2-5/16" coupler in…

view full answer...