Trailer Hitch Receiver Compatible with 2017 Mazda 6

Question

Question:

Item # C11356 I currently have a 2015 Mazda 6 with the curt trailer hitch. Im trading in for 2017 Mazda 6. Does my current trailer hitch fit?

asked by: Nicko S

0

Expert Reply:

Yes, the Curt # C11356 that is currently on your 2015 Mazda 6 will fit a 2017 Mazda 6.

I recommend replacing the hardware to install the hitch on the 2017. Use # RHK and enter the hitch information for the exact replacement.

If you're going to be towing a trailer and need the wiring harness use # C56280. It installs by plugging in to a connector behind paneling in the trunk. Then the hot lead will be connected to the positive battery post through the included fuse holder.

expert reply by: Charles S

0

Answer 1

The EcoHitch part #306-X7301 for your 2017 Mazda 6 is an interesting hitch based on it's size and classification. It's a 2 inch hitch which typically means Class III hitch or higher but this is considered to be a Class I based on it's…

view full answer...

Answer 2

I've created a photo for you showing all three hitches next to each other. The hitch in the middle 24908 by Draw-Tite is no longer available. Both of the two remaining hitches share a very similar design, have the same weight capacities and would…

view full answer...

Answer 3

Yes, you will need to trim a very small portion of the rear bumper fascia in order to install a trailer hitch on a 2020 Subaru Outback Wagon. That said, this portion of the rear bumper fascia is at the very bottom and will not be visible from outside…

view full answer...

Answer 4

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an image from…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Trailer Hitch Receiver Compatible with 2017 Mazda 6

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching