Troubleshooting Curt Trailer Wiring on 2011 Dodge Journey that Left Tail Light Stays On
Question:
Couple years ago I purchased this curt c56154 wiring harness for my 2011 dodge journey. Yesterday after getting home I noticed my left turn signal light was still on after car was turned off. I then removed the bulb to prevent battery from going dead. After a little research on computer some one said it could be the curt module . I disconnected it and now everything is OK. This bulb was incadesent where as the break lights are leds. Could this have caused the problem since the unit is supposed to be for leds. Im afraid to order another one and have the same problem
asked by: Dennis S
Helpful Expert Reply:
What you described sounds like a shorted out converter box. What most likely happened is that your trailer wiring has a short in the wiring somewhere and it shorted out the converter box as what you described is characteristic of a shorted out converter box. What you will need to do is find and fix the short in the wiring and then replace the trailer wiring harness.
Look for any cut or exposed wiring and fix as needed. Corrosion can also be the culprit so you'd want to clean that up if you found it.
This harness can work fine with LED or incandescent trailer lights.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: etrailer Trailer Brake Controller Universal Kit Review
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2014 Dodge Journey
- Video: Review of etrailer - Brake Controller - ETBC7
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: 2023 Best Gifts for Haulers & Towers
- Q&A: Trailer Wiring Harness Recommendation for 2016 Dodge Journey
- Q&A: Is an Installation Video Available for the Curt T-Connector Harness C56330 in a 2013 Dodge Journey
- Q&A: Parts Needed to Tow Boat Trailer with Brakes in 2019 Nissan Rogue
- Q&A: Driver Side Tail Lights Shut Off After Trailer Wiring Harness Install on a 2018 Dodge Journey
- Q&A: Which Trailer Wiring Harness for 2013 Dodge Journey with LED Taillights
- Search Results: 4 pin to 7 pin adapter
- Search Results: 7 pin 4 pin connector
- Shop: Trunk Bike Rack
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer brake controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Video: Choosing the Right Brake Controller
- Search Results: brake controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams