Is an Installation Video Available for the Curt T-Connector Harness C56330 in a 2013 Dodge Journey
Question:
is there a installation video for this product
asked by: David
Expert Reply:
We have not had a vehicle here to allow us to produce an installation video for this particular wiring harness, Curt # C56330, in the 2013 Dodge Journey. However, since this is a plug-in harness its installation will be quite similar to that of many other comparable products from Curt and other brands. Please note that this harness works only with vehicles that have LED-type tail lights. It will not work with vehicles that have incandescent lights.
Installation requires temporary removal of the two tail light assemblies. The plugs going into the light assemblies are removed and the T-connector plugs are installed between them and the lights. The white ground wire with ring terminal is to be secured to a clean metal surface behind the driver-side light. The converter box will mount behind the driver-side light using included double-sided tape. The only actual wiring to be done is to install a 12V fused power wire, which is included, as are the required connectors and zip ties to secure the wire to the frame. This wire connects to the short black wire at the converter box and the other end is to be run along the underside of the vehicle and up to the engine compartment to the positive terminal on the battery where the fuse holder will be installed. I have included a photo of this harness with the parts labelled as well as the manufacturer instructions, which include color photos.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Brake Controller
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2014 Dodge Journey
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Q&A: Trailer Wiring Harness Recommendation for 2016 Dodge Journey
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Review of etrailer - Brake Controller - ETBC7
- Video: etrailer Trailer Brake Controller Universal Kit Review
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Article: 2023 Best Gifts for Haulers & Towers
- Q&A: Driver Side Tail Lights Shut Off After Trailer Wiring Harness Install on a 2018 Dodge Journey
- Q&A: Which Trailer Wiring Harness for 2013 Dodge Journey with LED Taillights
- Q&A: Troubleshooting Curt Trailer Wiring on 2011 Dodge Journey that Left Tail Light Stays On
- Q&A: Parts Needed to Tow Boat Trailer with Brakes in 2019 Nissan Rogue
- Search Results: 4 pin to 7 pin adapter
- Search Results: 7 pin 4 pin connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2017 Dodge Journey
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56330 Review
- Shop: Trunk Bike Rack
- Q&A: Troubleshooting Left Rear Trailer Light That Glows with Vehicle Turned Off
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Video: Best 2014 Dodge Journey Trailer Wiring Options
- Shop: Vehicle Tow Bar Wiring
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Custom Fit Vehicle Wiring
