How to Find Correct Bearings for 2000 Dorsey Boat Trailer
Question:
Hi...will these fit a Yr 2000 Dorsey Boat Trailer?
asked by: Craig C
Expert Reply:
To determine if the TruRyde Bearing Kit for #84 Spindle # BK2-100 will fit the spindles on your Dorsey boat trailer, you will want to confirm the bearings in your existing hub assembly. The bearing numbers should be stamped onto the bearings themselves. If you cannot locate them, then you can also measure the trailer spindle at various locations. I have attached an image that shows what measurements are needed. I recommend using a digital caliper like # PTW80157, as the measurements will need to be exact.
This Bearing Kit has a # L44649 outer bearing, # L44610 outer race, # L68149 inner bearing and # L68111 inner race. It is designed for #84 spindles on a 3,500 pound axle.
I have also attached a couple of articles on trailer bearings and hub assemblies that you may find helpful.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: l68149
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-312-313 Review
- Search Results: inner seal
- Search Results: 10" brake assembly
- Search Results: atwood wheel cylinder
- Search Results: inner bearing
- Search Results: spindle
- Search Results: 10" drum
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 8K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3.5K
- Q&A: Shelby Model # 5784 Trailer Jack Replacement Option
- Q&A: How to Confirm Correct Size of Grease Seal
- Q&A: Replacement Grease Seal for Old Boat Trailer with 2-5/16 OD and 1-11/16 ID
- Shop: Brake Controller
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Double Lip Grease Seal - 010-180-00
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Suspension Enhancement