Recommended 7-way Round Pin To 7-Way Blade Adapter

Question

Question:

I was woundering if I could send you guys a picture of a campers plug that Ive been having trouble finding an adapter for so I could hook it up to my truck

asked by: Roger

0

Expert Reply:

Based on your pictures, you need a 7-way blade adapter to 7-way round trailer end. I have just what you need. I recommend the Custer Trailer Connector Adapter w/ Dust Cover - 7-Pole Round Pin to 7-Way Blade # F77R.

expert reply by: Jason S

0

click to enlarge

Answer 1

So the round 7-way is more common on heavy duty setups whereas the blade style 7-way is much more commonly used on the lighter duty RV setups. Aside from compatibility there really isn't a significant difference. You could use a 7-way round to…

view full answer...

Answer 2

The Adapter 6-Pole to 7-Pole Trailer Wiring Adapter #47435 will plug into a 6 round connector on your truck and then convert it to the larger more common 7-pole connector. While the connector is round the terminals inside are mostly blade connectors.…

view full answer...

Answer 3

The Curt Echo Wireless Trailer Brake Controller #C51180 is compatible with 7-Way blade style sockets, but if you use the Trailer Connector Adapter #HM47425 it should make the Echo compatible with the 7-Way round socket on your semi. Below is a list…

view full answer...

Answer 4

That is definitely a Euro style 7-way that you submitted a picture of. You would want to remove this connector and go with a standard 7-way blade connector like part #PK11893. The best way to do that is to use a circuit tester like our #PTW2993 to…

view full answer...

Answer 5

We do have the Pollak Trailer Connector Adapter #HM47425 which is designed to plug into a 7-way round and give you a 7-way blade connector. This would work well for you.

view full answer...

Answer 6

No. The 7-Way end in the #47405 adapter is made for the North American style of 7-Way round pins. A European 7-Way, see picture, has separate turn signals and brake lights and a circuit for fog lamps. The tail lights are also separate. You would need…

view full answer...

Answer 7

Since your light plugs into a 7-way round you'd actually need the opposite adapter than the #F77R. Which for that you'd just need the part #PK12728.

view full answer...

Answer 8

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Answer 9

We have an adapter that was designed specifically for that with the Trailer Connector Adapter - Vehicle End - 7-Pole Round to 7-Way Blade #HM47425. This will plug into your vehicle's 7-way round and give your trailer a 7-way blade connector.

view full answer...

Answer 10

The easiest way to go from a 7-way round connector to a 7-way flat would be to get a Trailer Connector Adapter part #HM47425. However, if you are looking for a more permanent solution you would need to remove your 7-way round connector and wire up…

view full answer...

Answer 11

What you have on your 1993 Ford F150 is a round 7-way, and it sounds like your travel trailer has a blade style 7-way. All you need is the correct adapter and you would be good to go. For that you would want the Trailer Connector Adapter #HM47425.…

view full answer...

Answer 12

You are correct in looking at the Curt Ball Mount w/ Sway Control Tab for 2" Hitches #D320. The hitch rating on the trailer is a class IV rating as a maximum. The ball mount you see is still within the maximum weight of your Keystone Premier…

view full answer...