Parts Needed to Install an Electric Brake Controller on a 2017 BMW X5

Question

Question:

Hello, I am looking to purchase a 2017 BMW X5 and I would like a wiring harness recommendation that will work with a Tekonsha Prodigy P2 Electronic Brake Controller I already own this one if possible. If not compatible, please recommend another wiring harness brake controller configuration that will work with the 2017 X5. Thank You

asked by: Joe B

1

Helpful Expert Reply:

I can help you find what you need to get it installed but there isn't a direct plug-in wiring adapter for the Prodigy P2 # 90885 that's confirmed to fit your 2017 BMW X5.

You can install a 4-way trailer connector on the back of your X5. Use # 119250KIT for this. It needs to be hardwired into the BMW's wiring. Then use our # ETBC7 kit to convert the 4-way to a 7-way. This kit also includes everything you need to install the P2.

However, finding the wiring under the dash for the P2 is extremely difficult on a BMW SUV like yours. Many people stay away from it. Instead of using the P2 another option is to install the same 4-way connector and then add a 7-way, # 37185. You won't connect the brake circuit wire. You will need enough wire to go from the 7-way to the positive post of your battery.

Then for a brake controller use the Curt Echo # C51180. This installs in the 7-way connector and uses its 12-volt circuit for power. Then it communicates wirelessly with your smartphone.

If you don't already have a trailer hitch on the BMW I suggest the Draw-Tite # 75600. It's a 2 inch, Class III hitch that installs with no welding or drilling.

expert reply by: Charles S

1

Answer 1

You may need to try to find some other wiring on your 2015 Kia Sorento until you find a wire with your tester that only gets hot when your brake pedal is pressed. I tried looking up what the wire color might be for cold side of your brake light…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...