Ball Mount to Clear Rear Bumper on 2013 Toyota Sienna and Provide Close to 7 Inch Rise
Question:
I got a 2013 Toyota Sienna with a Curt receiver installed. According to my measurements, I need a 2inch hitch with 7inch of space between the center of the hitch pin hole and the edge of the supporting gusset to clear the bumper for the required 7inch rise. Is there such a hitch available?
asked by: Paul D
Helpful Expert Reply:
Based on your measurements getting exactly what you need is a little tricky but I have some possible options for you. I can get you close to the rise you need by using ball mount # D-28, which has a 4 inch rise, with hi rise ball # C40034 or # C40032, both of these balls offer another 2 inches of height for a total rise of 6 inches. The tongue weight of the trailer will pull it down a little so at most you would be off level by 1 inch.
Products Referenced in This Question
1-7/8" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 3500 lbs GTW
- Class III
- CURT
more information >
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Shop: Towing Mirrors
- Search Results: 11953~2
- Search Results: 3891
- Video: Brophy Ball Mounts - Fixed Ball Mount - EA80 Review
- Video: Brophy Ball Mount Review EA20
- Video: Review of Curt Trailer Hitch Ball Mount - Fixed Ball Mount - C45112
- Video: Curt 2 Inch Hitch Ball Mount Review
- Video: Curt Hitch Ball - Trailer Hitch Ball - C40036 Review
- Q&A: Ball Mount Recommendation for 2 inch Hitch that Needs Rise of 6.75 Inches
- Q&A: Does Capacity of Ball Mount Change if Used in Rise Position
- Q&A: Maximum Tongue Weight Capacity of 2017 Subaru Outback Wagon
- Shop: Curt Ball Mount for 2" Hitches - 7" Rise, 8-1/4" Drop - 9-3/8" Long - 10,000 lbs
- Shop: Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
- Shop: 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Shop: Brophy Ball Mount - 7" Rise, 8" Drop - 15-1/4" Long - Aluminum - 8,000 lbs
- Shop: CIPA Universal Dual Lens Towing Mirrors - Clip On - Qty 2
- Shop: CIPA Universal Towing Mirrors - Clip On - Qty 2
- Shop: Curt Ball Mount for 2" Hitches - 6-1/4" Rise, 7-1/2" Drop - 13" Long - 5,000 lbs
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Search Results: hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Choosing the Right Brake Controller
- Search Results: trailer hitch
- Search Results: brake controller
- Q&A: How to Determine Correct Ball Mount Rise or Drop for Towing a Trailer with a 17 Inch Coupler Height