Does the Curt Trailer Hitch Receiver # C11356 Come With the Fish Wire for Installation
Question:
Does Item # C11356 come with 4 fish wires as shown in the installation video?
asked by: Don M
Expert Reply:
The Curt Trailer Hitch Receiver # C11356 does come with the fish wire so that you can properly install the included hardware.
Please note that per Curt, the Curt Trailer Hitch Support Strap # 18050 must be used for all non-trailer loads, such as bike racks, cargo carriers and such. Otherwise the warranty for the Curt Trailer Hitch Receiver # C11356 will be void.
If you will be using the hitch for towing, then I recommend using the Curt Class II Drawbar # C45016 along with either the 2 inch Hitch Ball # A-82 or the 1-7/8 inch Hitch Ball # A-80, whichever is correct for your application. The drawbar has a 2-5/8 inch Rise and a 3-1/4 inch Drop; I have attached an article that you should check out about selecting a drawbar with the correct rise or drop to make sure that the C45016 will work for you.
To help deter theft of your drawbar you can use our etrailer.com Hitch Receiver Lock # e98879.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Hitch for a 2024 Honda CR-V Hybrid
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Trailer Hitch Recommendation for 2017 Mazda 6 for Carrying Thule T2
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Tool is Normally Used for Torqueing Down Hitch Balls
- Q&A: Hitch Recommendation for a 2015 Mazda 6
- Q&A: Gaining Rise With a Hitch Ball
- Q&A: How To Install A 2-5/16 Inch Hitch Ball To A Draw Bar That Has Limited Access to the Hitch Ball Nut
- Q&A: How to Torque Hitch Ball When Installing into Ball Mount
- Article: How to Strap a Bike To a Roof Rack
- Article: Trailer Hitch Receiver Sizes
- Article: Trailer Hitch Installation Tips
- Article: How to Choose a Bike Rack for a Sedan or Hatchback