Trailer Hitch Reciever Compatiblity With 2015 Isuzu NPR HD Truck

Question

Question:

Hi We have a 2015 Isuzu NPR HD truck with lift gate. Just wondering if you have trailer hitch for this kind of truck. Thanks

asked by: Deyu W

0

Expert Reply:

For your 2015 Isuzu NPR HD truck with lift gate, we don't have any custom fit trailer hitch receiver options. Depending on your frame, you may be able to use an RV hitch receiver like the Ultra-Fab 2" Trailer Hitch Receiver for 5th Wheel Trailer Frames # UF35-946403. You will need to check for fit and compatibility yourself as I can't confirm a fit. This hitch welds directly to the frame. I also recommend you check your owners manual for towing ability.

expert reply by: Jason S

0

Answer 1

Your 2016 Isuzu NPR will need a weld-on trailer hitch, and there are a couple of options from Draw-Tite, which is the same manufacturer as Reese hitches. Based on my research, a '16 NPR has a 33-1/2 inch chassis width, so you can choose from…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 10

The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…

view full answer...

Answer 11

You were on the right track already with the #41990 for your 2010 Mitsubishi Fuso FE145. There are no custom fit hitches so a universal weld-on is the only option. We have the #41990-07 that comes with 7" brackets, the #41990-16 with 16"…

view full answer...

Answer 12

I have attached a photo showing what the distance is between the bolt holes and the dimensions of the mounting brackets for the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-16 that you can reference. The installation instructions…

view full answer...