Trailer Hitch that Fits 2000 BMW 528i Wagon

Question

Question:

I would like to install a trailer hitch on my 2000 BMW 528i wagon, do you offer a hitch appropriate for this and how do I install?

asked by: Seth R

0

Expert Reply:

For your 2000 BMW 528i wagon we do have the Curt hitch part # C11179 that is a confirmed fit. I attached a link to the installation instructions for you to check out but basically you will have to drill a few holes in the rear of the vehicle to run the hardware through the vehicle's body/frame.

expert reply by: Jameson C

0

Answer 1

For your 2003 BMW 525i we only have a Class I hitch from Curt part #C11179. This is a 1-1/4 inch hitch for lighter duty vehicles like what you have. 2 inch hitches are reserved for vehicles with higher towing capacities. We don't normally…

view full answer...

Answer 2

I have included an arrow that points to the stiffener plates(Square Hole Spacers) for the Curt Trailer Hitch Receiver #C11179 for your 1999 BMW 5 Series. Also I have linked below the installation instructions that will list all the components that…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Trailer Hitch that Fits 2000 BMW 528i Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching