What Rack is the Open Utility Shovel, Rake and Broom Holder # RA-23 Designed to Fit

Question

Question:

will these fit a rackem pk-6 weedeater racks and if not what would i need to get to put this on my trailer and also does the package come with upper and lower racks

asked by: Joel O

0

Expert Reply:

The Open Utility Shovel, Rake and Broom Holder # RA-23 that you referenced is designed to fit the # RA-6RL which is very similar to the # PK-6 but is different enough that you wouldn't be able to use it. You would just want to use the part # RA-6RL.

expert reply by: Jameson C

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

view full answer...

Answer 4

We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack #PK-BMH. The…

view full answer...

Answer 5

I attached a picture that has all of the dimensions of the Rack Em Shovel holder part #RA-23 that you mentioned.

view full answer...

Answer 6

The correct brake controller harness for your 2023 Ford E-350 to install a Tekonsha Prodigy P3 part #90195 is the part #22292. The connector on your E-350 is in a really unusual location behind the vents above the stereo. To see how to access it…

view full answer...

Answer 7

Trailer ramp spring #362SW61 could work provided that the interior of the trailer is wide enough for the rod (the rod can be trimmed down as low as 48 inches). The capacity of this spring is 120 pounds so it will help when both raising and lowering…

view full answer...

Answer 8

The diameter of the holes on the 6 Slot Tool Rack #TH6B where a shovel would insert is 2 inches. Overall this measures 33-1/2 inches. The mounting holes are 31-3/4 inches apart.

view full answer...

Answer 9

From the wall to the end of the Six Additional Shelf Brackets #RA-24B measures 12-3/4" but if you take away the lip it is 12". There is a hole in the top of the brackets as well which measures 11-1/2" to the very end of the brackets.…

view full answer...

Answer 10

It sounds like to me that you are wanting to attach shelves to the e-tracks in your box truck. If that is the case then what we have for this is the CargoSmart Shelf Track Brackets part #3481726 which I think is what you are looking for but if it is…

view full answer...

What Rack is the Open Utility Shovel, Rake and Broom Holder # RA-23 Designed to Fit

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching