Replacement Bearing Bra For Bearing Buddy With 2-1/4 Inch Outer Diameter

Question

Question:

The OD on my Bearing Buddy measures 2 1/4 inches according to my wheeled caliper. I have no idea what the model number might be. Would the # BB19B replacement bra fit this Bearing Buddy?

asked by: Andrew D

0

Expert Reply:

Yes. The Replacement Bearing Buddy Bras for your Bearing Buddies are # BB19B. These covers have a little bit of adjustability as the Bearing Buddy can change shape slightly when being installed.

expert reply by: Jason S

0

Answer 1

The Replacement Bearing Buddy Bras #BB23B will be the closest size available. This will measure 2.4375 inches and is designed to fit the Bearing Buddy models 2328, 2328SS, 2441, 2441SS, 2717, 2717SS, 2562, 2562SS, 2240 and 2240SS

view full answer...

Answer 2

If the outside diameter of your Bearing Buddy measures 2.004 inches, you would need the Bearing Buddy Bra for a 1.980 hub bore part #BB19B. The bras are sold in pairs.

view full answer...

Answer 3

Based on the diameter of the Bearing Buddy that you measured the correct replacement bra or cover is the part #BB19B you mentioned.

view full answer...

Answer 4

Most likely the correct replacement bearing buddy bra that you would need is the part #BB19B which has an outer diameter of 2-1/8 inches. Part #BB17B has an outer diameter of 2 inches, and part #BB23B has an outer diameter of 2.441 inches (this…

view full answer...

Answer 5

The Bearing Buddy Replacement Covers, #BB19B, are made to fit the Bearing Buddy bearing protectors. If the bearing protectors that you have say 1.980, then that would be the size you would need. The only dust covers I sell separate are for the…

view full answer...

Answer 6

The Bearing Buddy Replacement Bras you will need are part #BB23B, model 23B. This cover is designed to fit Bearing Buddies with an outer diameter of 2-1/2 inches.

view full answer...

Answer 7

For a hub that uses a 2.25-inch grease cap the Bearing Buddy to use will be either chrome set #BB2240 or stainless-steel set #BB2240SS. It is best to use a caliper when measuring the hub bore as this gives the most accurate dimensions. It is better…

view full answer...

Answer 8

The Bearing Buddy Replacement Bras you will need are part #BB23B, model 23B.

view full answer...

Answer 9

When selecting bearing protectors the measurement needs to be as accurate as possible so you will need to use dial calipers. We have a digital set we use here for precise measurements. Since 2.24 is too large and 1.98 is too small the size in the…

view full answer...

Answer 10

The cardboard is intended to help keep the shape of the Bearing Buddy Bras like part #BB23B when they are shipped, and should be removed before installing the bras on your Bearing Buddys.

view full answer...

Answer 11

First, you will want to make sure you are using the correct size Bearing Buddy Bra for your application. We have three bearing buddy bras available, Replacement Bearing Buddy Bras #BB17B has a diameter of 2 inches Replacement Bearing Buddy Bras…

view full answer...

Answer 12

If you have a Bearing Buddy on your trailer that has an outer diameter of 2.035 inch the correct Bearing Buddy Bra replacement would be the part #BB19B.

view full answer...

Replacement Bearing Bra For Bearing Buddy With 2-1/4 Inch Outer Diameter

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching