Correct Replacement Bra for Bearing Buddy with Outside Diameter of 2.004 Inches

Question

Question:

I hace bearing buddys that are missing the bras. bearing buddy measure across about 2in and 40 thousands Which cover do I need Thanks

asked by: Bill

0

Expert Reply:

If the outside diameter of your Bearing Buddy measures 2.004 inches, you would need the Bearing Buddy Bra for a 1.980 hub bore part # BB19B. The bras are sold in pairs.

expert reply by: Mike L

0

Answer 1

Based on the diameter of the Bearing Buddy that you measured the correct replacement bra or cover is the part #BB19B you mentioned.

view full answer...

Answer 2

The Replacement Bearing Buddy Bras #BB23B will be the closest size available. This will measure 2.4375 inches and is designed to fit the Bearing Buddy models 2328, 2328SS, 2441, 2441SS, 2717, 2717SS, 2562, 2562SS, 2240 and 2240SS

view full answer...

Answer 3

Most likely the correct replacement bearing buddy bra that you would need is the part #BB19B which has an outer diameter of 2-1/8 inches. Part #BB17B has an outer diameter of 2 inches, and part #BB23B has an outer diameter of 2.441 inches (this would…

view full answer...

Answer 4

Yes. The Replacement Bearing Buddy Bras for your Bearing Buddies are #BB19B. These covers have a little bit of adjustability as the Bearing Buddy can change shape slightly when being installed.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

We have a full replacement for your light. The Command Electronics #CE86FR. Take a look at the attached video to see them in action.

view full answer...

Answer 8

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Correct Replacement Bra for Bearing Buddy with Outside Diameter of 2.004 Inches

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching