Can The Draw-Tite Class I 1-1/4 Inch Hitch # 24825 Hold Two Mountain Bikes On A 2009 VW Rabbit

Question

Question:

Will this hitch have any problems holding two mountain bikes. I am not planning on towing anything it is strictly for a hitch mount bike carrier. Also are all the hitches that are available for the rabbit hidden under the bumper? Draw-Tite on a 2009 Rabbit Thanks,

asked by: Matt

0

Expert Reply:

The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24825, has a tongue weight capacity of 200 lbs. This hitch will be able to hold two mountain bikes, but you will want to make sure the weight carrying capacity of the Class I hitch bike rack you choose will be able to hold the weight of your two mountain bikes. The weight carrying capacity is always determined by the lowest capacity in the complete setup, either the hitch or the bike rack.

I am including installation instructions on the Draw-Tite for your Volkswagen.

Some of the Class I hitch bike racks will be able to hold two bikes at 35 lbs. per bike (70 lbs. total) and others will hold two bikes at 45 lbs. per bike ( 90 lbs. total). I am including a link to a FAQ page on how to choose a hitch mounted bike rack. Also, I am including a link to a page of Class I hitch bike racks

The trailer hitches that are available to fit the 2009 Volkswagen Rabbit are all designed to fit under the rear fascia. The Curt Class I 1-1/4 Inch Hitch, part # 11099, is the only hitch that will need minor trimming of the rear fascia when being installed.

expert reply by: Jeff D

0

Answer 1

A hitch adapter like the Brophy Hitch Adapter 1-1/4" to 2" #HTAD allows you to use the 2" shank on the RockyMounts MonoRail 2 #RKY10004 on the 1-1/4" on your 2009 Honda CR-V, but using a hitch adapter of any type…

view full answer...

Answer 2

Thanks for the order of the Curt Trailer Hitch Receiver #C11090, which is a fit for your 2008 Volkswagen Eos. This is a Class I hitch with a 1-1/4 inch receiver, and will work perfectly with the RockyMounts MonoRail 2-Bike Rack #RKY10003. The…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...