Thule Mountaineer Lid Lifting Strut Replacement

Question

Question:

Hello I bought a Thule mountaineer box recently but found out the metal piece that is revited to the box is snapped off inside the hinge. Do you have the metal pieces on both sides as well as the hinge? Thanks

asked by: Seth T

0

Expert Reply:

The correct lid hinge for your Thule Mountaineer is the Replacement Dual Force Strut for Thule Roof Box, # TH14933. The Mountaineer is a discontinued product, so the only other parts we have are the Replacement Mounting Hardware for SportRack and Thule Cargo Boxes, # TH05603, I don't know if this includes the metal pieces you were referring to.

expert reply by: Jason S

0

Answer 1

You would need to look at the hardware. The 669ES will have easy snap hardware which will look like the part #43216 that you referenced. The 669 would have installation hardware that would look like part #TH04997 instead.

view full answer...

Answer 2

For your Thule Mountaineer Cargo Box, the replacement hinge you will want is the Thule Replacement Dual Force Strut for Thule Roof Box #TH14936. I spoke with my contact at Thule and she confirmed that this is the compatible replacement lid lifter for…

view full answer...

Answer 3

Is the actual lock housing missing or just the lock core that fits in it? Because if it is the housing then that part is not available as a replacement part. But if it is just the lock core then you can get #TH450200 which comes with 2 lock cores, 2…

view full answer...

Answer 4

The ball joint plate for your Thule cargo box is not something that is available as a replacement part. You can attempt to repair it if you still have the pieces, or fashion another way to attach the lid hinge if you want to get creative.…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Most of the time when a tow setup is porpoising with a weight distribution system all you have to do is add a bit more spring bar tension to minimize the porpoising. With an Equalizer system you would need to angle the spring bars down further to add…

view full answer...

Thule Mountaineer Lid Lifting Strut Replacement

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching