Is Trimming Required to Install Curt Hitch on a 2017 Chevy Spark

Question

Question:

I spoke with Jeffrey about a hitch for a 2017 Chevy Spark. Im wondering if you sell any hitch that doesnt require trimming of the fascia? Thanks.

asked by: Andy

0

Expert Reply:

The Curt hitch part # C11433 is a fit for your 2017 Chevy Spark and it requires a bit of rear fascia trimming.

I attached the instructions that shows some great pictures of how much trimming is required.

expert reply by: Jameson C

0

Answer 1

There is some fascia trimming needed in order to install a trailer hitch on your 2019 Chevy Spark, but it is up under the car. Th Curt Trailer Hitch #C11433 requires a 4-3/4" by 2" section to be trimmed, as you can see by the cut…

view full answer...

Answer 2

We haven't had the chance to install Curt trailer hitch #C11433 on a 2017 Chevy Spark so there aren't pictures. But I have included a picture from the installation instructions linked here and on the product page for the hitch that…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Is Trimming Required to Install Curt Hitch on a 2017 Chevy Spark

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching