Needing the Brackets to Install the CE Smith Single Axle Trailer Fender

Question

Question:

Which brackets are needed to mount these fenders?

asked by: Corey P

0

Expert Reply:

The CE Smith Single Axle Trailer fender # CE19504 is designed to be used with 14 inch trailer wheels. The mounting brackets that you will need are # CE26098G-2.

These L-shaped brackets are made of galvinized steel and sold in pairs. You will need two sets of brackets to install two finders on a single axle.

expert reply by: Jared P

0

Answer 1

The mounting bracket dimensions between the CE Smith #CE19504 and the Fulton #F008594 that you referenced are both very similar. They are close enough that they would be interchangeable. The dimension on the Fulton is 30-1/4 inches whereas on the…

view full answer...

Answer 2

The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 is my recommendation for you. It is 43-1/8 inches long x 11 inches wide x 12-1/2 inches tall which will give you a skirt height of…

view full answer...

Answer 3

There is a slight difference in the designs of the Fulton fender #F008584 and the CE Smith Fender #CE19504 but other than appearance there isn't a whole lot of difference. I have stood on a Fulton fender before and it did flex but it…

view full answer...

Answer 4

I went out to our warehouse to take a couple measurements on the CE Smith Single Axle Trailer Fender #CE19504 that you referenced. The inside arch between the two side steps measures 30-5/8 inches long. The step itself which I believe is what you…

view full answer...

Answer 5

I was informed by CE Smith that you will need to use the Mounting Brackets #CE26098G-2 to properly attach the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps #CE19504-2.

view full answer...

Answer 6

The CE Smith Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 14" Wheels, has a mounting point that measures, from center to center, 34-1/2 inches. These fenders come in either a quantity of one or two: - Quantity of 1: CE…

view full answer...

Answer 7

The Fulton Single Axle Trailer Fender part #F008584 and CE Smith Single Axle Trailer Fender part #CE19504 are both excellent replacement trailer fender options. Unfortunately, we cannot confirm fit on any one particular make/model. They are designed…

view full answer...

Answer 8

In order to mount the CE Smith Single Axle Trailer Fender - 16 Gauge Steel - 13" Wheels #CE17721 you can use the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2 #CE26098G-2. These come in…

view full answer...

Answer 9

The bracket that will work best for your trailer and the fender part #CE19504-2 that you referenced will vary based on your trailer, but the part #CE26098G is an L-bracket that works best for most people who buy this fender. The dimensions are…

view full answer...

Answer 10

The best option we'd have to replace the fenders on your trailer would be the Fulton Single Axle Trailer Fenders with Top and Side Steps part #F008584-2. The measurements we have for this fender appear to be very similar to that of the brackets…

view full answer...

Answer 11

The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 2 #CE19504-2 and single fender #CE19504 will attach to your trailer's existing brackets. If your trailer doesn't have the brackets then you…

view full answer...

Answer 12

The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 14" Wheels - Qty 1 #CE19504 can be installed with a u-bolt around your trailer frame instead of drilling into the frame using CE Smith U-Bolt - Galvanized -…

view full answer...

Needing the Brackets to Install the CE Smith Single Axle Trailer Fender

Product Page this Question was Asked From

Continue Researching