How Long Are the Bulldog Winch Booster Cables with Quick Connect

Question

Question:

How long are they?

asked by: Randy J

0

Expert Reply:

I reached out to my contact at Bulldog Winch, and confirmed that the length of the Bulldog Winch Booster Cables with Quick Connect, # BDW20298, is 20 feet.

expert reply by: Jason S

0

Answer 1

Since the Bulldog Winch Booster Cable Set - Quick Connect to Clamp #BDW20298 is rated for up to 2,000-amps this'll work just fine with a 10,000-lbs-12,000-lbs winch like the Bulldog Winch Trailer Winch - Wireless Remote - Wire Rope #BDW10039.…

view full answer...

Answer 2

Yes, the Superwinch Winch 2 Go Portable Winch - Wire Rope - Hawse Fairlead - 4,000 lbs #SW1140222 has the ability to reverse the motor. The line can be electronically pulled out or pulled in with the touch of the switch/remote. This is ran off of a…

view full answer...

Answer 3

Based on what I have found, the 3K7258 axle is a standard 3,500 lb axle. To add brakes to your Carry-On trailer you will need the following: -Hub and Drum Assemblies: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles #AKHD-545-35-EZ-K -Brake…

view full answer...

Answer 4

The Bulldog Winch Booster Cable Set part #BDW20197 is composed of the Bulldog Winch Booster Cable Set part #BDW20298 and the Bulldog Winch Front Wiring Kit part #BDW20205. Therefore, it sounds like you are just looking for the Bulldog Winch Front…

view full answer...

Answer 5

Yes, I can guide you through the correct way to power your Warn 4000 lb winch by your vehicles battery. You will need to use the item you selected, Trailer and Vehicle Electric Winch Wiring Kit, part #BDW20207, which uses quick disconnects. You can…

view full answer...

Answer 6

For a winch like the Superwinch S6000 Winch #CU854754 you will simply want to use the Trailer and Vehicle Electric Winch Wiring Kit #BDW20207. Since winches can vary on how much they can pull this also affects how much power they need. For a winch…

view full answer...

Answer 7

For an Anbull 13000-lb winch, I recommend going with a 2 gauge wire like the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End, part #BDW20207. It can handle any winch up to a 16.5K capacity. It is 24 feet long, which is the longest we…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

How Long Are the Bulldog Winch Booster Cables with Quick Connect

Product Page this Question was Asked From

Continue Researching